Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: jerryfreak on August 20, 2019, 08:56:50 PM
-
i have a KCY IPA im gonna cannabilize to use with a pair of nick's actives that have switchcraft EN3 connection
they are og schoeps colletes not nbobs if that makes a difference
what are the pinouts for these KCY binder and EN3 connectors?
i know the kcy connectors are obsolete, im gonna cannibalize a TA6F>female EN3 adapter i have
thanks
-
You can still buy the binder connectors - it's a 5 pin 711 or 712 (if you want shielding - not what Schoeps used)
The connectors are made by Binder and sold via the binder USA website.
pin assignments out of memory:
1 = gnd - shielding
2 = L - white wire
3 = R - yellow wire
4 = 6.2v FET - brown wire
5 = 60v Polarization - green wire
These colors align with Schoeps 4 conductor cabling
-
oddly enough the ipa uses all 5 pins plus a chassis ground
redundant ground?
-
oddly enough the ipa uses all 5 pins plus a chassis ground
redundant ground?
Probably to ground the barrel on the binder to help with shielding