PRF11 Recorder
http://www.astellnkern.com/Designed to be used as a module in conjunction with an AK3xx DAP, this recorder module has great specs, records up to DXD or double DSD 5.6MHz, with 2 x 48V phantom powered mini XLR inputs. Will be pricey once the DAP is bought as well but I guess the sound will be worth it. Primary drawback apart from price for a 2-channel set up is the double whammy of 2 x separate rechargeable batteries to go at any time. Recording time quoted as 4 hrs for 2 x phantom powered mics at 24/96. Also I can't see the maximum input levels on the MIC-IN, and minimum gain on MIC-In seems to be +9dB.
General Specifications
Model
Body Color
Body Material
Recording Channel
Audio Inputs
mini XLR 3pin map
Key Interface
Battery
Continuous Recording Time
Dimensions
Weight
PRF11 / AK Recorder
Meteoric Titan
Aluminum
2 channel, Stereo recording
mini XLR 3pin type MIC/LINE x2(L/R), AES3 x1(L), 3.5mm MIC/LINE x1
1 : Ground(G) / 2 : Positive(+) / 3 : Negative(-)
MIC / LINE1 / AES3 select key x1, MIC2 / LINE2 select key x1, Phantom Power select key x1 (off / 5V / 48V)
4,700mAh 3.7V Li-Polymer Battery
about 4hours (24bit/96kHz WAV, External Mic & Phantom Power 48V)
3.17 ”(80.7 mm) [W] x 5.01 ”(127.4 mm) [H] x 1.17 ”(29.9 mm) [D]
8.85 oz (251 g)
Audio Performance
Recording Bit Rate
Sampling Frequency
Frequency Response
A/D Dynamic Range
Equivalent Input Noise
THD+N
Gain
Low Cut Filters
Compressor & Limiter
Phantom Power
WAV : 16 / 24 / 32bit, DSD64, DSD128
44.1 / 48 / 88.2 / 96 / 176.4 / 192 / 352 / 384kHz
10Hz ~ 40kHz
116dB A-weighted bandwidth
MIC : -126dBu, 150ohm source, A-weighted filter
MIC : 0.0004% max (1kHz, -15dBu) / LINE : 0.0006% max (1kHz, -15dBu)
MIC : 9 to 60dB, 3.0dB increments / LINE : -96 to 22dB, 0.5dB increments
40 ~ 240Hz in 10Hz steps @ 6,12,18,24dB/oct
0 ~ -10dBFS, 1:2 ~ 1:20; Limiter, 1~1,000ms attack time, 10~2,000ms release time
5V / 48V