Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: UA5 Hi-Z or Lo-Z w/ AT4041's?  (Read 1781 times)

0 Members and 1 Guest are viewing this topic.

Offline mikesalvo

  • Trade Count: (51)
  • Taperssection All-Star
  • ****
  • Posts: 1835
  • Gender: Male
  • get your Avett on!!!
UA5 Hi-Z or Lo-Z w/ AT4041's?
« on: March 30, 2008, 09:28:05 PM »
SSIA. This is such a newb question, but which setting should I be using, and what consiquences would I suffer if I chose the wrong setting?
Logged
AKG se300b (ck/91, ck/93) > Busman T-Mod R-4

Offline Javier Cinakowski

  • !! Downhill From Here !!
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 4325
  • Gender: Male
Re: UA5 Hi-Z or Lo-Z w/ AT4041's?
« Reply #1 on: March 30, 2008, 10:21:43 PM »
Low...
Logged
Neumann KM185mp OR DPA ST2015-> Grace Design Lunatec V2-> Tascam DR-100mkIII

Offline twatts (pants are so over-rated...)

  • <://PHiSH//><
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 9941
  • Gender: Male
  • Lego made a Mini-Fig of me!
Re: UA5 Hi-Z or Lo-Z w/ AT4041's?
« Reply #2 on: March 30, 2008, 10:25:40 PM »
Pretty sure the HiZ/LoZ only effects the 1/4" inputs, not the XLRs...

You'll have to double check me on that...

Terry
Logged
***Do you have PHISH, VIDA BLUE, JAZZ MANDOLIN PROJECT or any other Phish related DATs/Tapes/MDs that need to be transferred???  I can do them for you!!!***

I will return your DATs/Tapes/MDs.  I'll also provide Master FLAC files via DropBox.  PM me for details.

Sony PCM R500 > SPDIF > Tascam HD-P2
Nakamichi DR-3 > (Oade Advanced Concert Mod) Tascam HD-P2
Sony MDS-JE510 > Hosa ODL-276 > Tascam HD-P2

******

Offline bhtoque

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 3308
  • Gender: Male
  • So much music, so little time.
Re: UA5 Hi-Z or Lo-Z w/ AT4041's?
« Reply #3 on: March 30, 2008, 10:33:33 PM »
Quote from: twatts on March 30, 2008, 10:25:40 PM
Pretty sure the HiZ/LoZ only effects the 1/4" inputs, not the XLRs...

You'll have to double check me on that...

Terry


Terry is right on. The High/Low Z is for musical instruments through the 1/4"
But do be sure to shut off the monitor switch. It creates a loop that degrades signal quality on analog outs

JAson
Logged
MG 200/210/270
AKG c422>s42>Hydra silver interconnects
AKG 391/92/93>MK 90/3 actives
>AM Hyper-Conductors
Studio Projects LSD2>MiAGi II
>Edirol R-4 (Oade T Mod)

db.etree.org/bhtoque
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.059 seconds with 29 queries.
© 2002-2024 Taperssection.com
Powered by SMF