Taperssection.com

Gear / Technical Help => Recording Gear => Topic started by: ero3030 on August 27, 2009, 07:46:55 PM

Title: 702 digi out ( coax }
Post by: ero3030 on August 27, 2009, 07:46:55 PM

anyone ever have any probs.?  could not go into a d8 the other nite.  tryed w/ my d8 at home and same prob.  get signal, but wont unpause to start recording.  any help would be great.  ed

Title: Re: 702 digi out ( coax }
Post by: datbrad on August 28, 2009, 10:54:43 AM

You are feeding the D8 16 bit, 44.1 or 48 khz, correct?

Title: Re: 702 digi out ( coax }
Post by: JasonSobel on August 28, 2009, 01:03:33 PM

you should be able to feed a D8 with a 24 bit signal, but the D8 will truncate the signal and only record 16 of those bits.  However, the signal will have to be 44.1 or 48 kHz, as DATBRAD mentioned above.

Title: Re: 702 digi out ( coax }
Post by: mmedley. on September 08, 2009, 08:40:50 PM

Change the settings in the 7XX menu to output the digi signal to either pro or consumer. I forget what the D8 likes. Consumer I think?

Menu option 47 (Digital Output: Mode) on latest firmware.

Title: Re: 702 digi out ( coax }
Post by: ero3030 on September 08, 2009, 09:12:07 PM

Quote from: mmedley. on September 08, 2009, 08:40:50 PM

Change the settings in the 7XX menu to output the digi signal to either pro or consumer. I forget what the D8 likes. Consumer I think?

Menu option 47 (Digital Output: Mode) on latest firmware.

tried that aready.  signal comes threw, but deck wont unpause.  tried w/ 2 diff. d8's.  will have to find a diff deck to go digi in on.  ed