Author Topic: 702 digi out ( coax } (Read 2033 times)

ero3030 · « **on:** August 27, 2009, 07:46:55 PM »

anyone ever have any probs.? could not go into a d8 the other nite. tryed w/ my d8 at home and same prob. get signal, but wont unpause to start recording. any help would be great. ed

datbrad · « **Reply #1 on:** August 28, 2009, 10:54:43 AM »

You are feeding the D8 16 bit, 44.1 or 48 khz, correct?

JasonSobel · « **Reply #2 on:** August 28, 2009, 01:03:33 PM »

you should be able to feed a D8 with a 24 bit signal, but the D8 will truncate the signal and only record 16 of those bits. However, the signal will have to be 44.1 or 48 kHz, as DATBRAD mentioned above.

mmedley. · « **Reply #3 on:** September 08, 2009, 08:40:50 PM »

Change the settings in the 7XX menu to output the digi signal to either pro or consumer. I forget what the D8 likes. Consumer I think?

Menu option 47 (Digital Output: Mode) on latest firmware.

ero3030 · « **Reply #4 on:** September 08, 2009, 09:12:07 PM »

Quote from: mmedley. on September 08, 2009, 08:40:50 PM

Change the settings in the 7XX menu to output the digi signal to either pro or consumer. I forget what the D8 likes. Consumer I think?

Menu option 47 (Digital Output: Mode) on latest firmware.

tried that aready. signal comes threw, but deck wont unpause. tried w/ 2 diff. d8's. will have to find a diff deck to go digi in on. ed

Author Topic: 702 digi out ( coax } (Read 2033 times)

ero3030

702 digi out ( coax }

datbrad

Re: 702 digi out ( coax }

JasonSobel

Re: 702 digi out ( coax }

mmedley.

Re: 702 digi out ( coax }

ero3030

Re: 702 digi out ( coax }