you cant point either capsule though, the bottom is fixed. you can turn the mic in the shockmount, but that doesn't count.
glad we got that figured out.
So, my cable is either backwards, or my microphones pins are...as my red XLR is most definetely left and not right.
The pinout for the cable is pretty easy. I'll post it later on when I take it apart and look at it and snap some pics.
I'm just trying to find good cable that is not too thick. I like the thickness and flexibility of the stock cable. but the construction, as we know...blows goat.
One option for cable design (if possible) is to set somthing up like the way the Denecke PS2 outputs its XLR w/one jumped off of the other. though, I dont think that would work in this regard.
Another option is to run two seperate 3con cables through teflex. that will make the XLR end pretty and the DIN end a little "custom" as you need to combine the sheilding together from both to solder into pin7 of the DIN (I believe from memery that pins 1-3 are "right" and 4-6 are "left" w/7 being the ground).
as for cable, I have found some sweet ass OFHC silver clad single wire 28AWG that i'm probably going to get. I'll just make it by hand and run it through shielding and teflex. I have not looked for the 7pin DIN XLR yet, but Im sure that is standard issue and wont be too hard to find.