Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: drivingwheel on February 27, 2011, 11:48:39 PM
-
rolling with the Tascam dr-2d.
I have a pair of mxl993s that I plan to use in conjunction with a line-in from the board, mostly. I was wondering what sort of preamps I should get to attenuate the board feed, and also something that I could use for the mics to go into the line-in while using the internal mics (or to use 4 externals; a friend has a pair of Oktavas he lets me borrow from time to time, and my drummer has a pair of old Neumanns, so at some shows where I can't get a board feed, I can roll 4 mics at once.
I need something versatile and small, but not terribly expensive.
Thanks for all the help.
-
rolling with the Tascam dr-2d.
I have a pair of mxl993s that I plan to use in conjunction with a line-in from the board, mostly. I was wondering what sort of preamps I should get to attenuate the board feed, and also something that I could use for the mics to go into the line-in while using the internal mics (or to use 4 externals; a friend has a pair of Oktavas he lets me borrow from time to time, and my drummer has a pair of old Neumanns, so at some shows where I can't get a board feed, I can roll 4 mics at once.
I need something versatile and small, but not terribly expensive.
Thanks for all the help.
Naiant LittleBox
http://www.naiant.com/naiant/microphoneamplifiers.html
There are LOTS of recordings out there w/ them and theyre HIGHLY customizable ;) Heres my 1st recording w/ my new LB, w/ the INPUT Transformers ON!
http://bt.etree.org/details.php?id=542790&hit=1
My LittleBox has:
INPUT/OUTPUT Transformers
Transformer Bypass Switch(INPUT)
Phantom Power ON/OFF Switch
4xAA Battery Holder
DIN3 Connector+Cable
XLR INS
RCA/1/8" OUTS