Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: kkaye on January 23, 2004, 10:50:56 PM

Title: patching question, sample rate
Post by: kkaye on January 23, 2004, 10:50:56 PM

I have a question on sample rates.

I have been using 44.1 when Ive been patching
(having problems converting 48 to 44.1 to burn cds, but thats another story, )

When patching is it a problem if I have my D8 set to 44.1 and the incoming signal is 48?

Im asking because I think this might have caused some diginoise my last time out, otherwise I havent had problems before.

Thanks for any tips.

Title: Re:patching question, sample rate
Post by: jpschust on January 23, 2004, 10:56:29 PM

ok, you will pick up whatever the lead deck has if its all a digital line of patches.  doesnt matter what your deck is set at if you are going in digitally.  

Title: Re:patching question, sample rate
Post by: kkaye on January 23, 2004, 11:00:15 PM

OK, thanks, and I am using a oade 7pin for patching,
I guess there is something else behind the weird diginoises last time out.

Title: Re:patching question, sample rate
Post by: jpschust on January 23, 2004, 11:01:10 PM

could be his deck. could be your 7 pin.  could be your transfer. could be your deck.  lots of possabilities

Title: Re:patching question, sample rate
Post by: John R on January 24, 2004, 02:11:10 AM

Quote from: jpschust on January 23, 2004, 11:01:10 PM

could be his deck. could be your 7 pin.  could be your transfer. could be your deck.  lots of possabilities

could be his cable

Title: Re:patching question, sample rate
Post by: F.O.Bean on January 25, 2004, 10:29:00 AM

could be your heaeds on your deck