Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: swapping channels using soundforge??  (Read 2478 times)

0 Members and 1 Guest are viewing this topic.

Offline lynchie

  • Trade Count: (9)
  • Needs to get out more...
  • *****
  • Posts: 3492
  • Gender: Male
swapping channels using soundforge??
« on: March 03, 2012, 09:32:42 AM »
I've poked around and can't seem to find a simple way of doing it. Before I try to copy and paste does anyone have an easier way using SF.10?

thanks
Logged
DPA 4023's,mg210's
Sonosax Sx-m32
Mixpre 6ii
Oppo DV-981 HD>Grace 901>ancient Harmon Kardon Citation>Klipsch HSF 8.5 floor speakers

Offline vanark

  • TDS
  • Site Supporter
  • Trade Count: (29)
  • Needs to get out more...
  • *
  • Posts: 8526
  • If you ain't right, you better get right!
    • The Mudboy Grotto - North Mississippi Allstar fan site
Re: swapping channels using soundforge??
« Reply #1 on: March 03, 2012, 10:49:17 AM »
I don't use SF, but google got me the manual and it says:

Process menu - Channel Converter
From the presets use the Stereo to Stereo - Swap Channels preset

http://sony-012.vo.llnwd.net/dspcdn/manuals/soundforgepro10_manual_enu.pdf (page 180)
Logged
If you have a problem relating to the Live Music Archive (http://www.archive.org/details/etree) please send an e-mail to us admins at LMA(AT)archive(DOT)org or post in the LMA thread here and we'll get on it.

Link to LMA Recordings

Link to Team Dirty South Recordings on the LMA

Mics: Microtech Gefell M21 (with Nbob actives) | Church Audio CA-11 (cards) (with CA UBB)
Pres: babynbox
Recorders: Tascam DR-60D | Tascam DR-40 | Sony PCM-A10 | Edirol R-4

Offline lynchie

  • Trade Count: (9)
  • Needs to get out more...
  • *****
  • Posts: 3492
  • Gender: Male
Re: swapping channels using soundforge??
« Reply #2 on: March 03, 2012, 11:38:50 AM »
Thanks Rory!
Logged
DPA 4023's,mg210's
Sonosax Sx-m32
Mixpre 6ii
Oppo DV-981 HD>Grace 901>ancient Harmon Kardon Citation>Klipsch HSF 8.5 floor speakers

Offline Myco

  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 7572
  • Gender: Male
Re: swapping channels using soundforge??
« Reply #3 on: March 03, 2012, 09:57:34 PM »
I could have told you that Lynchie. ;)
Logged
Microtech Gefell M200: M20/M21/M27 caps> Bumblebee MiAGi-II/Darktrain silver cable's/"Chuck" Belden cables> Aerco MP-2 or Busman modded DR-680 pre-amps> Darktrain cables & interconnects> Tascam DR-680 (Busman mod)
AT853's(card's/hyper's)>AT8533x>Aerco MP-2>Sony M10
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.064 seconds with 33 queries.
© 2002-2024 Taperssection.com
Powered by SMF