Taperssection.com

Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: snoknight on December 29, 2005, 02:38:32 PM

Title: UA-5 EIAJ dc power connector
Post by: snoknight on December 29, 2005, 02:38:32 PM

So i have searched high and lo for info on the true connector for the Edriol products like the UA-5.
yes the rat shack has dc connector but there designed to mate up with a split center pin on the male side which creates a solid connection.
the EIAJ (electronics industry association of japan )type has a solid center pin and needs a female compression connector (cord Side) with the compression tines inside itself, creating the tight connection u want.
here she is and in a 90 degree config too.
http://www.accesscomms.com.au/products/K3700.htm

http://www.accesscomms.com.au/Catalogcurrent/Power.pdf

Title: Re: UA-5 EIAJ dc power connector
Post by: Karl on January 02, 2006, 02:44:13 PM

fwiw, I use rat shack connectors and have never had a problem.  Have you discovered any actual problems with running the rat shack connectors?  Is there a real advantage to using these connectors you've found?