Become a Site Supporter and Never see Ads again!

Author Topic: AKG Active Project part 4  (Read 76672 times)

0 Members and 1 Guest are viewing this topic.

Offline jbou

  • Trade Count: (15)
  • Taperssection Member
  • ***
  • Posts: 404
Re: AKG Active Project part 4
« Reply #30 on: May 11, 2011, 12:32:43 PM »
One lead is for the polarization voltage, so 3-wire is like 2-wire PIP, and 4-wire is like 3-wire, which can be balanced is generally lower impedance.  So if you're running more than 10 feet of cable, you probably want 4-wire.

Even if you are running less than 10ft of cable, is the sonic quality affected/degraded by running them 3-wire?

Offline Hypnocracy

  • Site Supporter
  • Trade Count: (46)
  • Needs to get out more...
  • *
  • Posts: 2011
  • Hypnocratic Missionary
    • Hypno on teh LMA
Re: AKG Active Project part 4
« Reply #31 on: June 20, 2011, 09:01:12 PM »
Probably not too many people are interested in this, but I took a picture anyway  ;)



The metalwork falls under the "barely functional" category, but it's enough for me to test the circuit.  I will have to cut a new coupling once I acquire an 11/16" twist bit . . . which aren't that easy to find locally, it seems . . . fortunately I am *not* doing the production metalwork!

http://taperssection.com/index.php?topic=145217.150

:woot
_____________
hypno on teh Archive

This must be heaven -- 'cause here's where the rainbow ends
If this ain't the real thing, then it's close enough to pretend

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: AKG Active Project part 4
« Reply #32 on: June 20, 2011, 09:57:04 PM »
Probably not too many people are interested in this, but I took a picture anyway  ;)



The metalwork falls under the "barely functional" category, but it's enough for me to test the circuit.  I will have to cut a new coupling once I acquire an 11/16" twist bit . . . which aren't that easy to find locally, it seems . . . fortunately I am *not* doing the production metalwork!

http://taperssection.com/index.php?topic=145217.150

:woot

AWESOME JON :)
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline leehookem

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 4439
  • Gender: Male
    • Texas Tapers
Re: AKG Active Project part 4
« Reply #33 on: June 22, 2011, 11:47:48 AM »
it's so pretty
www.texastapers.org


AKG c480b ck61/ck63 > Tascam DR-70D
Oade ACM Marantz PMD-671
AKG ck61/63 > NBob Actives > Naiant PFA > Tascam DR-70D
Oade ACM Marantz PMD-671
Audiophile 2496 > Mytek Stereo96 DAC > Sony MDR-7506
Dual 1229 > Marantz 2270 > Kimber Kables > Cerwin Vega VS120

Canon Rebel XSi, EF 50 mm f/1.8, EF-S 18-55mm f/3.5-5.6 IS

Offline TaperBryan

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3930
  • Gender: Male
  • "Vicarious existence is a fucking waste of time"
Re: AKG Active Project part 4
« Reply #34 on: June 22, 2011, 09:21:37 PM »
Nice!  I must say...running the mk4 last week while on ph tour made me reaaaaaaaaaaaaaaaaaaally want some actives.  I check in on this thread often for progress updates since i'm also a member of team AKG.  Hoping an active system for the 480/ck6x is made available soon.   ;D
09/23/2020 rig update: AKG c480b(ck61/62/63) > NAIANT/pfa > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod) and/or Tascam DR-70D

03/22/19 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod) and/or Tascam DR-70D

12/17/11 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod)

02/07/07 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > Lunatec V3 and/or EAA-PSP2 > ODL-276 > Nomad JB3 and/or Sony TCD-D8 DAT

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: AKG Active Project part 4
« Reply #35 on: June 24, 2011, 08:47:07 PM »
Nice!  I must say...running the mk4 last week while on ph tour made me reaaaaaaaaaaaaaaaaaaally want some actives.  I check in on this thread often for progress updates since i'm also a member of team AKG.  Hoping an active system for the 480/ck6x is made available soon.   ;D

 I LOVE running actives Bryan. JUST DOOOOOOOOOOOOO EEEEEEEEEEETTTTTTTTTTTTTT!
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline TaperBryan

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3930
  • Gender: Male
  • "Vicarious existence is a fucking waste of time"
Re: AKG Active Project part 4
« Reply #36 on: June 26, 2011, 05:30:30 PM »
Nice!  I must say...running the mk4 last week while on ph tour made me reaaaaaaaaaaaaaaaaaaally want some actives.  I check in on this thread often for progress updates since i'm also a member of team AKG.  Hoping an active system for the 480/ck6x is made available soon.   ;D

 I LOVE running actives Bryan. JUST DOOOOOOOOOOOOO EEEEEEEEEEETTTTTTTTTTTTTT!

once a akg active system is on the market, i'm checking my finances.  Have some home improvement projects to handle first, though...
09/23/2020 rig update: AKG c480b(ck61/62/63) > NAIANT/pfa > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod) and/or Tascam DR-70D

03/22/19 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod) and/or Tascam DR-70D

12/17/11 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod)

02/07/07 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > Lunatec V3 and/or EAA-PSP2 > ODL-276 > Nomad JB3 and/or Sony TCD-D8 DAT

Offline EarlyMorningRain

  • Trade Count: (7)
  • Needs to get out more...
  • *****
  • Posts: 2779
Re: AKG Active Project part 4
« Reply #37 on: June 26, 2011, 06:07:50 PM »
once a akg active system is on the market, i'm checking my finances.  Have some home improvement projects to handle first, though...

Offline jbell

  • TDS
  • Trade Count: (149)
  • Needs to get out more...
  • *****
  • Posts: 4568
  • Gender: Male
  • Spreadicated
Re: AKG Active Project part 4
« Reply #38 on: July 28, 2011, 06:46:09 PM »
Are we going to see the AKG actives by the end of the summer??

Probably not too many people are interested in this, but I took a picture anyway  ;)



The metalwork falls under the "barely functional" category, but it's enough for me to test the circuit.  I will have to cut a new coupling once I acquire an 11/16" twist bit . . . which aren't that easy to find locally, it seems . . . fortunately I am *not* doing the production metalwork!

http://taperssection.com/index.php?topic=145217.150

:woot
Mics: DPA ST4011ER & 4018ER | Neumann kk 184 (matched)> Nbob/PFA
Preamps: DPA MMA 6000 | Audioroot Femto
Recorders: Sound Devices Mixpre-10 II | Sony PCM A10

-20        -12         -6        TDS   (32/48)     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

Offline Hypnocracy

  • Site Supporter
  • Trade Count: (46)
  • Needs to get out more...
  • *
  • Posts: 2011
  • Hypnocratic Missionary
    • Hypno on teh LMA
Re: AKG Active Project part 4
« Reply #39 on: July 28, 2011, 10:05:53 PM »
Seems like I heard something about 4 sets being passed out for testing by section members...don't know if it has happened yet or not...
_____________
hypno on teh Archive

This must be heaven -- 'cause here's where the rainbow ends
If this ain't the real thing, then it's close enough to pretend

Offline Dkrogh

  • Trade Count: (8)
  • Taperssection Regular
  • **
  • Posts: 198
  • When is my next upgrade?
Re: AKG Active Project part 4
« Reply #40 on: September 25, 2011, 06:02:44 PM »
just checking back in since I've been crazy busy the last couple months.
AKG ck63 > AKG c480b > Marantz PMD670

Offline willndmb

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 6792
  • Gender: Male
Re: AKG Active Project part 4
« Reply #41 on: September 25, 2011, 10:15:31 PM »
Seems like I heard something about 4 sets being passed out for testing by section members...don't know if it has happened yet or not...
hasn't happened
a lot of schoeps stuff has been getting done though such as a lb with binder connector
check out the tinybox 1.5 thread in retail for more on that
Mics - AKG ck61/ck63 (c480b & Naiant actives), SP-BMC-2
XLR Cables - Silver Path w/Darktrain stubbies
Interconnect Cables - Dogstar (XLR), Darktrain (RCA > 1/8) (1/8 > 1/8), and Kind Kables (1/8f > 1/4)
Preamps - Naiant Littlebox & Tinybox
Recorders - PCM-M10 & DR-60D

Offline Chuck

  • Trade Count: (42)
  • Needs to get out more...
  • *****
  • Posts: 10811
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Re: AKG Active Project part 4
« Reply #42 on: October 19, 2011, 01:06:41 PM »
Keeping the thread alive...

Reality is merely an illusion, albeit a very persistent one.

Microphones: AKG C 480 B comb-ULS/ CK 61/ CK 63, Sennheiser MKE 2 elements,  Audix M1290-o, Micro capsule active cables w/ Naiant PFA's, Naiant MSH-1O, Naiant AKG Active cables, Church CA-11 (cardioid), (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlebox, Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Sound Devices MixPre-6, iRiver iHP-120 (Rockboxed & RTC mod)

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

Offline Hypnocracy

  • Site Supporter
  • Trade Count: (46)
  • Needs to get out more...
  • *
  • Posts: 2011
  • Hypnocratic Missionary
    • Hypno on teh LMA
Re: AKG Active Project part 4
« Reply #43 on: October 19, 2011, 07:10:19 PM »
We need a head count on who wants a set of Actives...

IIRC the only hold up is machining a housing...All other parts are available?
_____________
hypno on teh Archive

This must be heaven -- 'cause here's where the rainbow ends
If this ain't the real thing, then it's close enough to pretend

Offline Chuck

  • Trade Count: (42)
  • Needs to get out more...
  • *****
  • Posts: 10811
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Re: AKG Active Project part 4
« Reply #44 on: October 19, 2011, 07:26:29 PM »
1 - Chuck
Reality is merely an illusion, albeit a very persistent one.

Microphones: AKG C 480 B comb-ULS/ CK 61/ CK 63, Sennheiser MKE 2 elements,  Audix M1290-o, Micro capsule active cables w/ Naiant PFA's, Naiant MSH-1O, Naiant AKG Active cables, Church CA-11 (cardioid), (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlebox, Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Sound Devices MixPre-6, iRiver iHP-120 (Rockboxed & RTC mod)

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

 

RSS | Mobile
Page created in 0.097 seconds with 43 queries.
© 2002-2024 Taperssection.com
Powered by SMF