Topic: AT853 and Phantom Power--clarification

[mattb]

can someone post the link to the schematic again?

Topic was moved so the link doesn't work anymore.
Thanks.

All you have to do is remove the 'yabbse' from the link.

http://www.taperssection.com/index.php?board=3;action=display;threadid=15247;start=msg196993#msg196993

We (Bri?) should put a php script in that yabbse directory that will redirect any of these links to the non-/yabbse/ version. wouldn't be too hard to code. I'd offer a script but I haven't done much php. I could do it in asp.net in about five minutes.

[Evil Taper]

Can I mod my cmc-4 with xlr plugs to work with a mixer supplying 48v phantom per mic?  For running something like a 4 mic or 5 mic mix.

[Zaphod]

The phantom power adapters are XLR.

You can't just put XLRs on them and run them phantom, you have to use the P48 adapters.

[Evil Taper]

Is that the AT8333 part that is the phantom adapter or is there some other place I can buy this from.  I would like to permanently have these mics terminate with the XLR plugs...so what goes between the mic and those?

[§†∑∫åµÞ≥¥]

You'll want the AT8533x (2 of them). This is exactly what I used for the end of my AT933/853's. You can get them from http://www.soundprofessionals.com for about $78 each. I recommend calling them though and talking to Chris... when I got mine last month they had a surplus of them and he sold them to me for $50 each.