Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: tight cable fit with schoeps ortf bar  (Read 1711 times)

0 Members and 1 Guest are viewing this topic.

Offline panther65

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 177
tight cable fit with schoeps ortf bar
« on: November 22, 2006, 06:59:15 PM »
Found the Schoeps ORTF bar's cable slots quite tight and fear I might damage the cable forcing it in there. Has anyone filed those openings and should I worry about the cable being damaged or is it sturdy enough?
Logged
Schoeps MK4>KCY250/5I>Schoeps VMS 5 U>Tascam HD-P2

Offline Sanjay

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 5705
  • Gender: Male
  • www.drivebytruckers.com/tourdiary.html
Re: tight cable fit with schoeps ortf bar
« Reply #1 on: November 22, 2006, 07:45:22 PM »
not  exactly the same but I filed out my DIN KWON bar a hair and it worked perfectly.
Logged
mics & cameras

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re: tight cable fit with schoeps ortf bar
« Reply #2 on: November 23, 2006, 02:46:01 AM »
My Schoeps ORTF bar was snug, too.  Stressing the cable / connector junction always seemed like a bad idea, so I always slotted the cables through by pulling / pushing strictly on the cable, and not the connector.  Never had any problems.  YMMV.
Logged
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline Nick Graham

  • Amorican
  • Trade Count: (3)
  • Needs to get out more...
  • Posts: 4068
  • Gender: Male
Re: tight cable fit with schoeps ortf bar
« Reply #3 on: November 25, 2006, 12:03:46 PM »
My ORTF bar is a perfect fit, however my DINa Kwon bar is a nightmare. One side is virtually impossible to fit a capsule  in. Where/How would anyone suggest filing?
Logged
Right now nothing...in the past: Schoeps CMC6, AKG 480, AKG 460, AKG 414, MBHO 603a, Neumann KM100, ADK TL>Schoeps MK4, Schoeps MK2, Schoeps MK41, AKG ck61, AKG ck62, AKG ck63, Neumann AK40, Neumann AK50, MBHO ka200>Lunatec V2, Lunatec V3, Apogee Mini-Me, Oade M148, Oade M248, Sound Devices MP2, Sonosax SXM2>Sony (mod)SBM1, Apogee AD500>D7, D8, D100, M1, R1, R4, R09, iRiver HP120, Microtrack

Offline stober

  • Trade Count: (16)
  • Taperssection All-Star
  • ****
  • Posts: 1630
  • Gender: Male
Re: tight cable fit with schoeps ortf bar
« Reply #4 on: November 28, 2006, 10:07:56 PM »
Quote from: Brian Skalinder on November 23, 2006, 02:46:01 AM
My Schoeps ORTF bar was snug, too.  Stressing the cable / connector junction always seemed like a bad idea, so I always slotted the cables through by pulling / pushing strictly on the cable, and not the connector.  Never had any problems.  YMMV.
Yep I have your ortf bar now and I noticed it was pretty tight.And Nick I have a DINA bar thats the same way.I have to use more force than I want to get get my capsule in on one side.The other side/hole is fine.
Logged
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.051 seconds with 33 queries.
© 2002-2024 Taperssection.com
Powered by SMF