Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: backwhereubelong on May 29, 2014, 09:08:49 PM

Title: Sony PCM-M10 Mic-In Power Question
Post by: backwhereubelong on May 29, 2014, 09:08:49 PM

Is the Mic-In mic power enough to drive a set of Behringer C2 mics?  I'm recording tomorrow and have something in mind?

Title: Re: Sony PCM-M10 Mic-In Power Question
Post by: willndmb on May 29, 2014, 09:14:00 PM

The pip is between 3.5 and 5v
Can't recall of the top of my head

Title: Re: Sony PCM-M10 Mic-In Power Question
Post by: 2manyrocks on May 29, 2014, 09:40:54 PM

Apparently, the C-2s require 48v phantom power.  http://www.behringer.com/assets/C-2%20%28OEM%29_P0263_M_EN.pdf

Title: Re: Sony PCM-M10 Mic-In Power Question
Post by: apenino on May 30, 2014, 02:23:48 AM

You'll need a phantom power supply to operate with them.

Title: Re: Sony PCM-M10 Mic-In Power Question
Post by: lsd2525 on May 30, 2014, 08:40:40 AM

Pretty sure the M10's PIP is a flat 3v.