Become a Site Supporter and Never see Ads again!

Author Topic: Sony PCM-M10 Mic-In Power Question  (Read 2102 times)

0 Members and 1 Guest are viewing this topic.

backwhereubelong

  • Guest
  • Trade Count: (0)
Sony PCM-M10 Mic-In Power Question
« on: May 29, 2014, 09:08:49 PM »
Is the Mic-In mic power enough to drive a set of Behringer C2 mics?  I'm recording tomorrow and have something in mind?

Offline willndmb

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 6792
  • Gender: Male
Re: Sony PCM-M10 Mic-In Power Question
« Reply #1 on: May 29, 2014, 09:14:00 PM »
The pip is between 3.5 and 5v
Can't recall of the top of my head
Mics - AKG ck61/ck63 (c480b & Naiant actives), SP-BMC-2
XLR Cables - Silver Path w/Darktrain stubbies
Interconnect Cables - Dogstar (XLR), Darktrain (RCA > 1/8) (1/8 > 1/8), and Kind Kables (1/8f > 1/4)
Preamps - Naiant Littlebox & Tinybox
Recorders - PCM-M10 & DR-60D

Offline 2manyrocks

  • Trade Count: (12)
  • Taperssection All-Star
  • ****
  • Posts: 1664
Re: Sony PCM-M10 Mic-In Power Question
« Reply #2 on: May 29, 2014, 09:40:54 PM »
Apparently, the C-2s require 48v phantom power.  http://www.behringer.com/assets/C-2%20%28OEM%29_P0263_M_EN.pdf

Offline apenino

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 3
    • Lo-fields
Re: Sony PCM-M10 Mic-In Power Question
« Reply #3 on: May 30, 2014, 02:23:48 AM »
You'll need a phantom power supply to operate with them.

Offline lsd2525

  • Trade Count: (18)
  • Needs to get out more...
  • *****
  • Posts: 3399
  • Gender: Male
  • Eschew obfuscation
Re: Sony PCM-M10 Mic-In Power Question
« Reply #4 on: May 30, 2014, 08:40:40 AM »
Pretty sure the M10's PIP is a flat 3v.
Mics: SKM184's; ADK A51s; AT4041; Superlux S502; CK91 active w/homebrew BB; AT853; Naiant X-X; Nak 300's
Recorders: M10; DR-60D; DR-701D

 

RSS | Mobile
Page created in 0.07 seconds with 29 queries.
© 2002-2024 Taperssection.com
Powered by SMF