Taperssection.com
Gear / Technical Help => Ask The Tapers => Topic started by: SHKDWN on July 16, 2003, 03:20:24 PM
-
I posted on the Oade board as well, but maybe you guys can help as well.
As a follow up:
Recap..I am getting no signal via one channel when running Mk4>kc5>cmc6>M 118>xlr>Panasonic 255, but when I plug the 64 directly into the 118 I get signal in both channels.
I cleaned all the connections, caps, bodies, etc. I have narrowed it down to 1 of the cmc6 bodies not "activating" or sending the signal (is that correct language?) to the DAT when using the Kc5 active cables. It was suggested that I try another pre amp, one that uses 48 V phantom. So, I have an Sonosax, another complete set of mk4>kc5>cmc6 to test with. I plugged my problem body into the Sax and it sends signal fine. I have used every combo of pieces parts and it isn't the pre amps, actives, or the caps.
The only conclusion I can come up with is that the one "problem" body does not activate or like to be plugged into a 18 V Oade m118. I have used the 4>kc5>6>118 combo for the past year and it worked fine. One day it just stops.
Thoughts? Could there be something wrong in the cmc6 body that has stopped it from switching between the 12-48V power, depending on the pre that you use? I have no clue what to do at this point?
thanks,
nate
-
Nate-
why not just send the box to Doug and have him mod it to 48v? Lots of folks have had this done... Trey's beloved box was once a m118. The guts of the box are identicle, just the voltage is changed. That could be an easy fix...
Or you could get the cmc6 bodies serviced by schoeps.
-William
-
If you bought your cmc6 from a U.S. dealer you should be covered for free repair. But, if you bought it outside the U.S. go ahead and kick yourself in the ass for not spending that extra $50, b/c you have no warranty. If you did buy out of the US it will probably be much cheaper to send the oade box off and have it stepped up to a 148.
-
Nate-
why not just send the box to Doug and have him mod it to 48v? Lots of folks have had this done...
That is one way to solve the problem...thanks will. Anyone know what this would cost?
Does anyone understand how a cmc6 body functions? Could the part of the body that does the switching between 12-48 V get locked onto a certain volt or lose the ability to switch?
Anyone want the Roo ABB show....Will has them for sale for $7700....funny stuff.
thanks,
Nate
-
nate i think it was around 200-250, but I had alot done at once, new internals put in and so forth, just drop him an email
-
If you bought your cmc6 from a U.S. dealer you should be covered for free repair. But, if you bought it outside the U.S. go ahead and kick yourself in the ass for not spending that extra $50, b/c you have no warranty.
It's $50 dollars now...since Scheops finally got smart and packaged their products accordingly and the US$ is so weak vs. the Euro. For a long time it was a very significant difference in price. Glad Schoeps finally got on the ball. There is no question, if you were to buy a new set of Schoeps, buy from a US person....it's well worth the warranty.
-
nate i think it was around 200-250, but I had alot done at once, new internals put in and so forth, just drop him an email
Thanks for the heads up Pops. I could also...sell both sv255's and the Oade...and buy a V3. Effective cost of the V3 could be reduced way down ;-)................waiting on quotes right now.
Nate
-
Nate,
Have we ruled out operator error yet? Or better yet, the Fischer Jedi Mind Trick?
Eric
-
Nate,
Have we ruled out operator error yet? Or better yet, the Fischer Jedi Mind Trick?
Eric
Unless I was so spun out in my living room this morning when i set up the rig at 9 am, for the 30th time, and didn't realize Golden Girls was on the TV and that is what I was trying to tape......I think we can rule out any type of operator error or Jedi Mind tricks.
-
Nate, you still have a warranty if purchased overseas. Doug mentioned this in the past b/c some retailers were claiming the lack of warranty if purchased overseas.
-
Nate, you still have a warranty if purchased overseas. Doug mentioned this in the past b/c some retailers were claiming the lack of warranty if purchased overseas.
They were bought overseas, back in 00. Should I speak with Redding Audio? The 18V circuitry in one of the bodies is definately gone bad.
Thanks
Nate
-
selling the oade? talk to me first!!
-
selling the oade? talk to me first!!
Technically the Oade 118 only partially belongs to me... I am the only one that has used it, since the actual owner used it as a door stop from at least 96- Spring 02. Once I make the move back to Columbus..I'll see what he wants to do with it...and you'll be the first in line if he wants to sell it.
I am on the V3 team...that little beatch ROCKS.