Become a Site Supporter and Never see Ads again!

Author Topic: Should I buy TASCAM VL-M3s?  (Read 1792 times)

0 Members and 1 Guest are viewing this topic.

Offline yltfan

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2572
Should I buy TASCAM VL-M3s?
« on: March 23, 2010, 02:53:12 PM »
Are these any good? I need some monitors for the computer, but don't want to spend over $100. Sound Pros has these for $75 a pair, thought I'd give them a try.
http://www.tascam.com/products/vl-m3.html

Edit: Changed the title of this in hopes of getting some advice.
« Last Edit: March 24, 2010, 07:25:08 PM by yltfan »
Mics: AT4051, AT4053, KM140, AKG C414, Beyerdynamic MEM86 guns, Nak cm300, AT853 4.7mod
Pre: V3, CA-9100
Recorders: Busman DR-680, iRivers, minidisc, jb3, and DAT

Dime torrents: http://www.dimeadozen.org/account-details.php?id=88009

Offline DigiGal

  • AES Associate Member
  • Trade Count: (30)
  • Needs to get out more...
  • *****
  • Posts: 2583
  • Gender: Female
  • Stay healthy and safe!
    • DigiGal Internet Archive Recordings
Re: Should I buy TASCAM VL-M3s?
« Reply #1 on: April 11, 2010, 08:49:53 PM »
I think guitar center carries these, maybe you could try them in the store with some of your own music.  No other comments yet seems that no one is using them.  Price is fair and freq response is spec'd at 46hz-20khz @ + 0/-3dB but without a response graph. 
Mics: AKG CK91/CK94/CK98/SE300 D-330BT | DPA 4060 4061 4266 | Neumann TLM 103 | Senn ME66/K6/K6RD MKE2 MD421 MD431 | Shure VP88 SM7B SM63L SM58 Anniversary Cables: Gotham GAC-4/1 Quad w/Neutrik EMC | Gotham GAC-2pair w/AKG MK90/3 connectors | DigiGal AES>S/PDIF cable Preamp: SD MixPre-D Recorders: SD MixPre 6 | Marantz PMD 661 Edit: 2011 27" 3.4GHz Quad i7 iMac High Sierra | 2020 13" MBA Quad i7 Catalina | Wave Editor | xACT | Transmission | FCP X 

 

RSS | Mobile
Page created in 0.048 seconds with 26 queries.
© 2002-2024 Taperssection.com
Powered by SMF