Become a Site Supporter and Never see Ads again!

Author Topic: ADK TLs...  (Read 7477 times)

0 Members and 1 Guest are viewing this topic.

Offline Swampy

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 12020
  • Gender: Male
  • You Worthless Swampy Fool
ADK TLs...
« on: July 08, 2004, 01:09:30 PM »
Haha, I just realized, I dont know which side of the TLs is the front! Could somebody help me! THANKS!

Offline Swampy

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 12020
  • Gender: Male
  • You Worthless Swampy Fool
Re: ADK TLs...
« Reply #1 on: July 08, 2004, 01:13:30 PM »
Thanks Mike!

Offline Craig T

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 4312
    • LMA
Re: ADK TLs...
« Reply #2 on: July 08, 2004, 01:43:00 PM »
"ADK" logo = front.

funny story... this one time I was stage lip for a Derek Trucks show running the Neumann tlm170s cards x/y.  During the break before the encore I notice the red Neumann logos pointed in my direction as I stood behind the mics.  I had the mics pointed at the crowd instead of the stage!  I immediately switched the patterns from cardiod to fig-8 and did pull off a nice blumlein recording for the encore.  Definitely one of my biggest goofs, and now I never forget to double check which way the mics are rotated.
Schoeps cmc6/4v / Beyer mc950 / Line Audio CM3, OM1 / ADK A51 / Church Audio CA-14
Naiant Tinybox v2.2 / NBox(P) / Church Audio ST9200 / CA-UGLY
Sony PCM-M10 / Zoom F3 / Zoom F6

Offline Brian

  • Trade Count: (2)
  • Needs to get out more...
  • Posts: 9392
  • Gender: Male
Re: ADK TLs...
« Reply #3 on: July 08, 2004, 01:55:06 PM »
Alex,....
Its REAL EASY to switch patterns while making last minute adjustments before flying the mics. So always double check the switch setting also!

yep! i definitely ran a hyper and a card one night while not paying attention. doesn't sound bad but when you pan to to each channel they sound noticeably different.

edit: oh yeah, and another +T for the TL's ... you're gonna love 'em!

Offline creekfreak

  • Retired from taping
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8087
  • Gender: Male
  • My Son's School Bus
    • Rochester Groove
Re: ADK TLs...
« Reply #4 on: July 08, 2004, 02:06:00 PM »
I wondered that also when I first got them.......great mics, you will enjoy them, run the omni's splt
It is company policy never to imply ownership in the event of a dildo - We have to use the indefinite article; "A" dildo, never: "YOUR" dildo.
In Tyler we Trust

And isn't sanity really just a one-trick pony anyway? I mean all you get is one trick, rational thinking, but when you're good and crazy, ooh ooh ooh, the sky is the limit!

My Current Rig:2004 Subaru WRX STI, Stage 3, 360hp, 380lb-ft

Offline Tony B

  • Needs more sun.
  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1375
  • Gender: Male
  • My primitive mind can't grasp these concepts.
Re: ADK TLs...
« Reply #5 on: July 08, 2004, 02:09:43 PM »
I second that emotion. Ran 8" split omni for an outdoor show on Monday...GREAT results. Wonderful presence, with the vocals up front, and a pretty accurate soundstage, even given my modest playback system. I'll definitely fun the TL's like this again outdoors!
Coffee is for Closers

MG m200>AM Hyperconducters>V3>JayBeeThree/h120

Offline Swampy

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 12020
  • Gender: Male
  • You Worthless Swampy Fool
Re: ADK TLs...
« Reply #6 on: July 08, 2004, 02:10:39 PM »
Haha, thanks for the advice guys!

Offline blu666z

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3277
  • AT ES943(H/C/O caps) » JKLab PP9 Pre » wmod UA-5
Re: ADK TLs...
« Reply #7 on: July 08, 2004, 02:12:14 PM »
I second that emotion. Ran 8" split omni for an outdoor show on Monday...GREAT results. Wonderful presence, with the vocals up front, and a pretty accurate soundstage, even given my modest playback system. I'll definitely fun the TL's like this again outdoors!

I assume you meant 8 feet not inches?  Probably gonna try some split omnis this weekend if I can find another stand to clamp to.

-Kevin

Offline Tony B

  • Needs more sun.
  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1375
  • Gender: Male
  • My primitive mind can't grasp these concepts.
Re: ADK TLs...
« Reply #8 on: July 08, 2004, 02:15:15 PM »
Nope. 8 Inches. Honest! I was a bit skeptical myself, but after hearing that the distance you place omnis is an in-exact science at best, and that others had acheived satisfactory (or even great) results running them as close as 6" apart, I decided to give it a shot. Worked great to my ears.

Per this thread:  http://www.taperssection.com/yabbse/index.php?topic=21316.0
« Last Edit: July 08, 2004, 02:17:08 PM by Tony B »
Coffee is for Closers

MG m200>AM Hyperconducters>V3>JayBeeThree/h120

Offline blu666z

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3277
  • AT ES943(H/C/O caps) » JKLab PP9 Pre » wmod UA-5
Re: ADK TLs...
« Reply #9 on: July 08, 2004, 02:26:32 PM »
Interesting.  Think my tbar will get them about that far apart...may try that tonite since I won't need an extra stand.

-Kevin

Offline Tim

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 32913
  • Gender: Male
Re: ADK TLs...
« Reply #10 on: July 08, 2004, 02:42:31 PM »
space em out a bit further, you'll like the results much more...
I’ve had a few weird experiences and a few close brushes with total weirdness of one sort or another, but nothing that’s really freaked me out or made me feel too awful about it. - Jerry Garcia

Offline Brian

  • Trade Count: (2)
  • Needs to get out more...
  • Posts: 9392
  • Gender: Male
Re: ADK TLs...
« Reply #11 on: July 08, 2004, 02:50:06 PM »
i think with an 8" spread, using a j-disc would yield much better results, than without.  I'm gonna test this out in august for the euphio campout. but hey if you guys like the results then that's all that matters :)

Offline creekfreak

  • Retired from taping
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8087
  • Gender: Male
  • My Son's School Bus
    • Rochester Groove
Re: ADK TLs...
« Reply #12 on: July 08, 2004, 02:50:16 PM »
I have run them on omni about 8 inches a part, made a great recording, the farther you split them, the more stereo affect you get, and the more "space" you will here, I found both ways sound differnet but equally good.
It is company policy never to imply ownership in the event of a dildo - We have to use the indefinite article; "A" dildo, never: "YOUR" dildo.
In Tyler we Trust

And isn't sanity really just a one-trick pony anyway? I mean all you get is one trick, rational thinking, but when you're good and crazy, ooh ooh ooh, the sky is the limit!

My Current Rig:2004 Subaru WRX STI, Stage 3, 360hp, 380lb-ft

Offline Brian

  • Trade Count: (2)
  • Needs to get out more...
  • Posts: 9392
  • Gender: Male
Re: ADK TLs...
« Reply #13 on: July 08, 2004, 02:58:00 PM »
hey creek,

did you point the caps towards the stacks, or rotate them off axis at all? or just plain AB style? i'm gonna try this out sometime but point the caps towards the speakers.  higher frequencies are more directional so i think it would yield the best results sonically.

thanks

Offline creekfreak

  • Retired from taping
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8087
  • Gender: Male
  • My Son's School Bus
    • Rochester Groove
Re: ADK TLs...
« Reply #14 on: July 08, 2004, 02:59:16 PM »
I did plain A/B style, but I was so close that it really didn't matter
It is company policy never to imply ownership in the event of a dildo - We have to use the indefinite article; "A" dildo, never: "YOUR" dildo.
In Tyler we Trust

And isn't sanity really just a one-trick pony anyway? I mean all you get is one trick, rational thinking, but when you're good and crazy, ooh ooh ooh, the sky is the limit!

My Current Rig:2004 Subaru WRX STI, Stage 3, 360hp, 380lb-ft

 

RSS | Mobile
Page created in 0.097 seconds with 39 queries.
© 2002-2024 Taperssection.com
Powered by SMF