Topic: ADK TL mic storage

[china_rider]

Hey all... Just wondering if anyone has found a good solution to storing their TLs in their bag.  I'd like to move up from the Crown Royal pouches.   For my 480s I use a Pelican 1060 and would like to find something similar.  As far as pelican it seems like the 1150 would fit them but it is too thick on the outside measurements to fit in my bag with the R-4.  Anyone have any suggestions?

[Evil Taper]

Get one of those aluminum briefcases with the foam in it, Gator makes them I believe.

[china_rider]

Yea... That might be a bit to big to fit in my gear bag.  It's pretty much like the flight case they came with.  Something like the pelican 1060 would be perfect if it was 2-3 inches wider.

[Tim]

JBK used to use pouches that one would use to protect a glass tobacco pipe

[drewloo]

I use a padded nylon bag & their windscreens or a Platt 207 molded case (ok, it's actually called a 'blow molded case' but I wasn't comfortable saying that  ).  Its inner dimensions are 9.5" x 6" x 2.68".  It's nowhere near as nice as a Pelican case but they're considerably cheaper.  If I had to buy one again I'd look into the Platt 204 or possibly the 107 mainly for space considerations like yourself.
http://www.alliedelec.com/Images/Products/Datasheets/BM/PLATT_LUGGAGE/Platt-Luggage_Production-Supplies_9361022.pdf


One of the cats found the case open and empty a while back & took some flesh out from a couple of  spots.    I can't remember what I put in the other two open spots, but it seems to me that I could have gone at least an inch (possibly 2) shorter and still have enough padding on all sides. 

[china_rider]

Just picked up a 204.  Should fit in my bag perfectly.  Thanks all for the input. T+

[drewloo]

Just picked up a 204.  Should fit in my bag perfectly.  Thanks all for the input. T+

Cool, glad to be of assistance.  BTW, how do you like your mod'd TLs?  Any samples posted anywhere?  thanks

[china_rider]

Just got them back.  Was going to use them this weekend at Joshua Tree music fest but was not able to go.  The first run with them will be Monday for Pnuma Trio and Signal Path.  I'll put some samples out if all goes well.

Dana

[drewloo]

Right on.  I love the TLs but sometimes with my rig (mp-2>r-09) I wish for a little less sizzle on the high end and a little more steak on the low end.  Hopefully the Peluso capsules will help in those matters.  Good luck on the maiden voyage Monday.

[china_rider]

Here is the first outing with the modded TLs.  It's the 16bit version.  If you want I can give you a FTP logon for the 24 (To my ears there is a pretty big difference in the 24bit on playback).  I was running them set to cards in a small dive bar with a pretty good sound system.

http://bt.etree.org/details.php?id=510494

------------------------------

Pnuma Trio
2007-10-23
Rhythm Room
Phoenix, AZ

Source:
BMod ADK TL -> Silverpath XLRs -> BMod R-4 (24X48)

Transfer:
R-4 -> WAV -> Audition (Fades, Resample, MBIT+ Dither) -> CDWave (Splits) -> FLAC

Tape/Transfer/Seed:
china.rider@aztapers.org


PT20071023T09.flac:8b8a344c1a7ce0c56b1c3eac89a7654a
PT20071023T10.flac:2634dda7eede11d75fff714e51db3017
PT20071023T01.flac:d8021d6b4e239a9ebff1679d057ea77a
PT20071023T02.flac:76bd0a26dc9435bb0b662c9ed9ecdc2d
PT20071023T03.flac:8b42983473f28a271a764fd2fc51ae1a
PT20071023T04.flac:76e283665cff21b5f4e25b77f6b821b5
PT20071023T05.flac:469f9477114d05e049c04fed1c7e9426
PT20071023T06.flac:404235fb9bab7ae600dfb140d00ab42a
PT20071023T07.flac:99a7993af8a0f20d3dc67c9b04d25b04
PT20071023T08.flac:a6943db3a5088ec3d5539c2074dbfd6a

[NOLAfishwater]

I personally like to use a polymer pistol case b/c it provides shock absorption and stiff outer shell. my .02

[china_rider]

Do you know of one that would fit in a gear bag? 8"-9" wide and 5"-8" tall and <= 4" deep are my params.  I figure they should be pretty protected anyway since this case will go in my gear bag.  Hopefully they should not go though armageddon.  I was really surprised that pelican did not have anything for this size.

[flipp]

Depending how protected you want them to be, you might look into something from Rose Plastics. I use some of the twist packs for my telescope eyepieces. One of them may be close enough in size to fit a ld mic. If you think a case would be better, try one of their cases.  http://www.rose-plastic.us/frames/gb/usa/fr_technisch.php  One caveat is their listed minimum caselot is too large for me to even consider and my emails to them asking for more information and/or samples have gone unanswered. Luckily my local telescope dealer stocks some of the twist packs and sells them individually. They also stock a small eyepiece case which may suit your needs though it looks like you would have to recut/replace the foam. http://www.astronomics.com/main/search.asp?catsearch_header=Astronomics&keyword=eyepiece+case&x=0&y=0

[NOLAfishwater]

Do you know of one that would fit in a gear bag? 8"-9" wide and 5"-8" tall and <= 4" deep are my params.  I figure they should be pretty protected anyway since this case will go in my gear bag.  Hopefully they should not go though armageddon.  I was really surprised that pelican did not have anything for this size.

http://www.outdoorsuperstore.com/product.asp?manufacturer=PELICAN+PRODUCTS&model=Protect&cat=40906
If you scroll through the different product list there are different dimensions.

I would also check out Otter Boxes. Here is a link to all their different sizes
http://www.otterbox.com/products/otterbox/1000/techspecs.htm

[china_rider]

T+ will be taking a look.  Now that I have had a few outings with the mod TLs they are something I want protected for sure.  Could not be more happy with them.