Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: u2_fly_2 on October 22, 2013, 11:14:34 AM
-
Hello everyone,
have got some recent issues with my:
SP-SPSB-10-80020 (mini 12vdc battery)
First of all it has been working really good for 1 and a half years time, very happy with all my recordings.
Some questions about it (as there is some issues with them now - these questions pops up):
- How often / and should one replace the battery?
- If and so, How to open the little unitbox, it´s very tricky, any advice?
- Once I recorded a concerts using the SP-SPSB-10-80020 with my AT 943 Mic´s and Olympus -LS-10 Linear recorder,
one time I got these "buzzing" / "overdrive"-sound troughout the complete recording although the recording accept from this sounded quite alright...Then next time recording these "permanent buzzing" from the recording before was gone and I got a really nice recording like so many times before...is it issues connected to the SP-SPSB-10-80020 Module and the battery...?
- it seems that they´ve glued the battery module...not to be open or?
Here´s a photo of the module:
(http://i42.tinypic.com/rr7dar.jpg)
Any info / advices highly and thankfully accepted.
Sorry if this issues are cheesy...
Greetings
-
Hello everyone,
have got some recent issues with my:
SP-SPSB-10-80020 (mini 12vdc battery)
First of all it has been working really good for 1 and a half years time, very happy with all my recordings.
Some questions about it (as there is some issues with them now - these questions pops up):
- How often / and should one replace the battery?
- If and so, How to open the little unitbox, it´s very tricky, any advice?
- Once I recorded a concerts using the SP-SPSB-10-80020 with my AT 943 Mic´s and Olympus -LS-10 Linear recorder,
one time I got these "buzzing" / "overdrive"-sound troughout the complete recording although the recording accept from this sounded quite alright...Then next time recording these "permanent buzzing" from the recording before was gone and I got a really nice recording like so many times before...is it issues connected to the SP-SPSB-10-80020 Module and the battery...?
- it seems that they´ve glued the battery module...not to be open or?
Here´s a photo of the module:
(http://i42.tinypic.com/rr7dar.jpg)
Any info / advices highly and thankfully accepted.
Sorry if this issues are cheesy...
Greetings
Seems like good questions to ask SP? Why not send them an email?
-
That back cover should slide off pretty easily, you may have to push in those 2 little tabs through the front. I would replace those batteries after 40 hours or so of use, especially if you leave them in place between shows.
-
Thank you very much, the issue is now solved regarding the battery module, I´ll make a test with the rec-gear tomorrow and see if it´s the battery module that caused the prob in first place.