Taperssection.com
Gear / Technical Help => Cables => Topic started by: redbook on May 25, 2005, 03:24:31 PM
-
Hi there,
I have the following rig:
AT853 rx > PS2 > AD20 > JB3
What kind of cables do I need from the AD20 to the JB3?
Should I take the coax or the toslink route?
Thanks :)
-
Optical. The JB3 doesn't have a digital coax input.
-
Using somethink like this would be fine?
http://www.soundprofessionals.com/cgi-bin/gold/item/SP-MINI-90
-
That's just a RA adaptor, you need the whole cable. Something like this:
http://www.soundprofessionals.com/cgi-bin/gold/item/SP-TMOC-1
-
duh the picture showed the cable, too.
Should I got right angle connector on the toslink side? I think the optical calbles are very fragile
Edit: any specific brand recommended?
-
duh the picture showed the cable, too.
Should I got right angle connector on the toslink side? I think the optical calbles are very fragile
Edit: any specific brand recommended?
Radio Shack is a good place to pick 'em up...I haven't had any fragility problems:
http://www.radioshack.com/product.asp?catalog%5Fname=CTLG&product%5Fid=15-1597