Taperssection.com
Gear / Technical Help => Ask The Tapers => Topic started by: Kevin on September 02, 2003, 05:53:16 PM
-
why is it flashing an "err" error sign in the top right corner when I play a dat? It doesnt happen to all, I think it may have to do with the levels but they dont even reach 0 (at least most of the time and if they do they dont hit it 3 consecutive times)
thanks in advance for the help
Kevin ;D
-
oh also how do you check the hours and any suggestions on checking the unit out since I just bought it used off ebay?
-
I forget the trick that shows you how many hours. However, if this happens on a majority of tapes, then I would suspect you got ripped off and the unit needs to be repaired. This sounds like the classic R300 reel replacement problem. (there is a small gear that goes bad, Paul at Pro Digital can tell you more about the problem, and he and his crew can fix it, but most R300 owners I know have had to have their deck repaired for this problem -- including me).
Wayne
-
thanks for the suggestion but it has only happend to one of my tapes
-
If it is only happening on one of your tapes, it may be a problem with the tape. I also have a PCM-R300 and have only seen the dreaded red err light a few times, and it was with a tape that I knew had problems (it got eaten and I tried fixing it)
I wouldn't worry about it if it is only the 1 tape
-
+T, thanks for the help and yep its just that one tape all the rest are fine except it always says thin tape which doesnt matter, at least I dont think, just annoying :)
-
thin tape will come up for all 90m tapes
-
cool thanks for pointing that out, do you why it does it?