Become a Site Supporter and Never see Ads again!
« previous next »
Pages: 1 2 [3]  All   Go Down

Author Topic: 4 Channels  (Read 9580 times)

0 Members and 1 Guest are viewing this topic.

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 15745
  • Gender: Male
  • "Better to love music than respect it" ~Stravinsky
Re: 4 Channels
« Reply #30 on: January 15, 2012, 02:40:47 PM »
Quote from: noahbickart on January 15, 2012, 10:30:52 AM
Quote from: F.O.Bean on December 22, 2011, 06:06:05 PM
Also, if running external preamps, give the Tascam DR2D a chance. It runs for about 4-5 hrs recording to all 4 channels, and is dirt cheap :)

How does one do this? Can you meter both the mic in and the line in at the same time? From the pictures on the Tascam site, it seems like the 4 channel mode is really for the built in microphones.

Push a button to switch back and forth from metering the line-input to the metering the mic-input. Mic input can be either the internal mics or the external mic-input jack.
« Last Edit: January 15, 2012, 02:43:08 PM by Gutbucket »
Logged
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: 4 Channels
« Reply #31 on: January 15, 2012, 06:22:28 PM »
Quote from: Gutbucket on January 15, 2012, 02:40:47 PM
Quote from: noahbickart on January 15, 2012, 10:30:52 AM
Quote from: F.O.Bean on December 22, 2011, 06:06:05 PM
Also, if running external preamps, give the Tascam DR2D a chance. It runs for about 4-5 hrs recording to all 4 channels, and is dirt cheap :)

How does one do this? Can you meter both the mic in and the line in at the same time? From the pictures on the Tascam site, it seems like the 4 channel mode is really for the built in microphones.

Push a button to switch back and forth from metering the line-input to the metering the mic-input. Mic input can be either the internal mics or the external mic-input jack.

Bingo!
Logged
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings
Pages: 1 2 [3]  All   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.036 seconds with 26 queries.
© 2002-2024 Taperssection.com
Powered by SMF