Topic: Mini-XLRs on a PS-2/Phantom power modded AT943s

[blu666z]

Stealthed my first show last night.  Used some AT943s that have been modded to accept phantom power, however,  I don't have a small phantom power box so I reverted back to the battery box.  Recording is nice but I can tell that the bass does overpower them a bit so I would like move to a PS-2.  If I could get a PS-2 modded to have mini-xlrs could I bypass using the Samson PM4 power adapters or are they required when using these modded mics?

-Kevin

[zhianosatch]

Stealthed my first show last night.  Used some AT943s that have been modded to accept phantom power, however,  I don't have a small phantom power box so I reverted back to the battery box.  Recording is nice but I can tell that the bass does overpower them a bit so I would like move to a PS-2.  If I could get a PS-2 modded to have mini-xlrs could I bypass using the Samson PM4 power adapters or are they required when using these modded mics?

-Kevin

how would you be able to bypass the 48v adapters? unless i'm misunderstanding...

[blu666z]

I'm trying to figure out if the power adapters doing anything besides change the connection from a mini-xlr to regualr XLR?  Do they drop the 48v down to a lower voltage? 

-Kevin

[zhianosatch]

I'm trying to figure out if the power adapters doing anything besides change the connection from a mini-xlr to regualr XLR?  Do they drop the 48v down to a lower voltage? 

-Kevin

 
i think that's why they're called power adapters.

[blu666z]

http://www.samsontech.com/products/relatedDocs/qe_qv_pm4_manual.pdf

Only thing I can find is that they change the impedence from high to low.  Nothing about dropping the volts.

-Kevin

[zhianosatch]

well, look a little harder around ts.com and i think you'll find what you're looking for.

[Sean Gallemore]

I still haven't quite got it figured out in my head, but I believe yes, there is a series of resistors inside the AT8533/PM4 adapters, which probably drops the voltage down.  I wish someone with EE experience would chime in here.  I've started a multitude of threads regarding the checking of voltage on this adapter as well as the DPA equivelant(sp?) for the 4060 line.  My gear was effectively stolen for 2 weeks and then I have been out of the country for another so I remain unable to test it at this time.

[leegeddy]

Stealthed my first show last night.  Used some AT943s that have been modded to accept phantom power, however,  I don't have a small phantom power box so I reverted back to the battery box.  Recording is nice but I can tell that the bass does overpower them a bit so I would like move to a PS-2.  If I could get a PS-2 modded to have mini-xlrs could I bypass using the Samson PM4 power adapters or are they required when using these modded mics?

-Kevin

you need the power adaptors to provide phantom to the AT mics. if you want to make your setup smaller, you could take the innards of the Samson adaptors and put them INSIDE of the PS-2 (if there's room) and replace the XLR input of the PS-2 with mini-XLR connections.

marc

[BobW]

The BFFT 7-28-2004 is pretty damn sweet.
Right on Vic W. topping them once or twice, but he's a strong player and is featured in the mix.
P48 should help.  Do you think that card caps may have limited the bass, as well ?

I think that I like these enough to add them to my FOB arsenal.
So small, yet so clean.

AT943s and a pair of TLs and I'm set for a while.

Back to the recording, and a little microphonic dreaming............     

+T for posting the recording !

[blu666z]

The BFFT 7-28-2004 is pretty damn sweet.
Right on Vic W. topping them once or twice, but he's a strong player and is featured in the mix.
P48 should help.  Do you think that card caps may have limited the bass, as well ?

I think that I like these enough to add them to my FOB arsenal.
So small, yet so clean.

AT943s and a pair of TLs and I'm set for a while.

Back to the recording, and a little microphonic dreaming............     

+T for posting the recording !

Glad you're enjoying it.

943s and TLs...exactly what I have now.

-Kevin

[blu666z]

you need the power adaptors to provide phantom to the AT mics. if you want to make your setup smaller, you could take the innards of the Samson adaptors and put them INSIDE of the PS-2 (if there's room) and replace the XLR input of the PS-2 with mini-XLR connections.

marc

Problem is finding someone who would/can do it.  I would love to get it done though.  I'm definately gonna go PS-2 to replace the battrey box but PS-2 + power adapters is gonna be more bulky than just the battery box.

-Kevin

[Sean Gallemore]

you need the power adaptors to provide phantom to the AT mics. if you want to make your setup smaller, you could take the innards of the Samson adaptors and put them INSIDE of the PS-2 (if there's room) and replace the XLR input of the PS-2 with mini-XLR connections.

marc

Problem is finding someone who would/can do it.  I would love to get it done though.  I'm definately gonna go PS-2 to replace the battrey box but PS-2 + power adapters is gonna be more bulky than just the battery box.

-Kevin

JK Labs?

[blu666z]

JKLabs is on here right?

-Kevin

[Sean Gallemore]

JKLabs is on here right?

-Kevin

yep, I believe the user name is "jk labs"

[Steelcorner27]

Ya that rig is a bit bulky but Ive been stelthing with it myself for a month and its worth the extra size night and day sound qualtiy to the batt box..and ya the omni AT's are very bass sensitive and the ps-2 will help very much  and dont try to bypass the adapters I lost a cap in that experiment already.

Brad