Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: Mounting AKG caps when using JK Labs setup?  (Read 1817 times)

0 Members and 1 Guest are viewing this topic.

Offline BC

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 2269
  • Gender: Male
  • Bongo Bongo
Mounting AKG caps when using JK Labs setup?
« on: November 04, 2004, 08:23:42 PM »
Hey Team AKG'ers-

Just wondering what you all use to mount your capsules in the field to do ORTF, XY, DIN etc... when using them with an active JK labs setup.

Take care,
Ben


Logged
In: DPA4022>V3>Microtracker/D8

Out: Morrison ELAD>Adcom GFA555mkII>Martin Logan Aerius i

Offline keepongoin

  • Trade Count: (4)
  • Needs to get out more...
  • Posts: 5433
  • Gender: Male
Re: Mounting AKG caps when using JK Labs setup?
« Reply #1 on: November 04, 2004, 10:23:33 PM »
Lee Williams had a thread about this, I think he made his t-bars from PVC, if I remember correctly.
Logged
“When fascism comes to America, it will be wrapped in the flag and carrying the cross.” Sinclair Lewis: How Fascism Will Come To America (1935)

"Science is facts; just as houses are made of stones, so is science made of facts; but a pile of stones is not a house and a collection of facts is not necessarily science."- Henri Poincare

http://www.archive.org/bookmarks/pierce

Offline fozzy

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 3810
  • Gender: Male
  • move along, nothing much to see here
Re: Mounting AKG caps when using JK Labs setup?
« Reply #2 on: November 04, 2004, 10:39:00 PM »
some folks are using the $chempz and i know robert kwon has offered in the past to make folks DIN, DINa snd such bars for the akg's.  I have also seen someone, don't remember who, using a b&k bar.

Logged
MK 4V > KCY 250/5 Ig (KS 10I)  > VST62IUg > 722

Offline Todd R

  • Over/Under on next gear purchase: 2 months
  • Trade Count: (29)
  • Needs to get out more...
  • *****
  • Posts: 4901
  • Gender: Male
Re: Mounting AKG caps when using JK Labs setup?
« Reply #3 on: November 05, 2004, 01:30:22 PM »
I use the Kwon "schoeps" DINa bar with my JK Labs AKG active setup.  The bar holders are just a bit too big for the JK Labs active cable ends, so I need to wrap a loop of duct tape around the base of the actives to get them to fit snugly.
Logged
Mics: Microtech Gefell m20/m21 (nbob/pfa actives), Line Audio CM3, Church CA-11 cards
Preamp:  none <sniff>
Recorders:  Sound Devices MixPre-6, Sony PCM-M10, Zoom H4nPro
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.052 seconds with 30 queries.
© 2002-2024 Taperssection.com
Powered by SMF