Become a Site Supporter and Never see Ads again!

Author Topic: noise on tape sunday night. help!  (Read 5791 times)

0 Members and 1 Guest are viewing this topic.

Online Gordon

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 11786
  • Gender: Male
    • my list
Re: noise on tape sunday night. help!
« Reply #15 on: March 09, 2006, 09:58:07 PM »
full charged walmart battery.   

SparkE!

waveform looked fine.  I'll check it out again.
Microtech Gefell M20 or M21 > Nbob actives > Naiant PFA > Sound Devices MixPre-6 II @ 32/48

https://archive.org/details/fav-gordonlw

https://archive.org/details/teamdirtysouth

Online Gordon

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 11786
  • Gender: Male
    • my list
Re: noise on tape sunday night. help!
« Reply #16 on: March 09, 2006, 10:11:30 PM »
wavform.  highlighted noise.  looks fine zoomed in as well. the print screen of the zoom was way to blurry to post.

« Last Edit: March 09, 2006, 11:07:12 PM by Gordon »
Microtech Gefell M20 or M21 > Nbob actives > Naiant PFA > Sound Devices MixPre-6 II @ 32/48

https://archive.org/details/fav-gordonlw

https://archive.org/details/teamdirtysouth

Offline SparkE!

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 773
Re: noise on tape sunday night. help!
« Reply #17 on: March 09, 2006, 10:16:41 PM »
full charged walmart battery.   

SparkE!

waveform looked fine.  I'll check it out again.

I was talking about when you zoom in close enough to see individual samples.  Are there any jump discontinuities or repeated samples in the waveform when you look at it that closely?
How'm I supposed to read your lips when you're talkin' out your ass? - Lern Tilton

Ignorance in audio is exceeded only by our collective willingness to embrace and foster it. -  Srajan Ebaen

CHURCH-AUDIO

  • Guest
  • Trade Count: (0)
Re: noise on tape sunday night. help!
« Reply #18 on: March 09, 2006, 11:03:29 PM »
I think this noise could be in the front end of your chain. Like the mic caps being lose as was already being mentioned or a bad mic cable. But the problem is as you can see from this wavform of your sample that its broad band there are a few spikes. If it was a lose capsule it would be broad band like this but this can also be a cable issue. I would try using Deoxit on all your connections even the back of the capsule but make sure its a very very small amount. Get the gold stuff 100% the small tube is about $15.00 and it works great. Try that first it could also be a dirty pot on a preamp.

Chris Church



so I got some static etc on my rose hill drive from the other night.  nothing has changed in my rig.  same cables (xlr and opti) etc.  the jb3 had just been formated and disc clean up.  now from spot checking the opener I don't hear any static.  however it's all over the rose hill drive.  the only thing different is that I changed from hypers to cards between sets.  I haven't ran the cards in months but last time they were fine.  here's the thing that worries me.  I don't think I turned off the v3 when I changed caps.  is that bad?  I'm now thinking yea.  no idea why I didn't.  brain fart I guess.  thoughts??  I'm gonna set everythig up at the house tomorrow and run some test.  here's a short mp3 sample.



Online Gordon

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 11786
  • Gender: Male
    • my list
Re: noise on tape sunday night. help!
« Reply #19 on: March 09, 2006, 11:11:10 PM »
can you get that stuff anywhere?
Microtech Gefell M20 or M21 > Nbob actives > Naiant PFA > Sound Devices MixPre-6 II @ 32/48

https://archive.org/details/fav-gordonlw

https://archive.org/details/teamdirtysouth

CHURCH-AUDIO

  • Guest
  • Trade Count: (0)
Re: noise on tape sunday night. help!
« Reply #20 on: March 09, 2006, 11:23:28 PM »
Here is the URL hope this helps.
http://www.caig.com/
Chris Church


can you get that stuff anywhere?

Offline Dutchman1101

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2856
  • Gender: Male
Re: noise on tape sunday night. help!
« Reply #21 on: June 26, 2006, 10:16:08 PM »
What ever came of this situation? Did the noise happen again? I swithced my caps today with the phantom power on and want to know if that might have caused the noise or if the mics or caps had to be serviced.

Offline leehookem

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 4439
  • Gender: Male
    • Texas Tapers
Re: noise on tape sunday night. help!
« Reply #22 on: June 26, 2006, 10:53:53 PM »
This sounds like what happened to my Les Claypool recording last Wednesday.  It happened a little during Topaz on Thursday, but not Guy Forsyth on Saturday, nor Topaz on Sunday.
www.texastapers.org


AKG c480b ck61/ck63 > Tascam DR-70D
Oade ACM Marantz PMD-671
AKG ck61/63 > NBob Actives > Naiant PFA > Tascam DR-70D
Oade ACM Marantz PMD-671
Audiophile 2496 > Mytek Stereo96 DAC > Sony MDR-7506
Dual 1229 > Marantz 2270 > Kimber Kables > Cerwin Vega VS120

Canon Rebel XSi, EF 50 mm f/1.8, EF-S 18-55mm f/3.5-5.6 IS

Online Gordon

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 11786
  • Gender: Male
    • my list
Re: noise on tape sunday night. help!
« Reply #23 on: June 26, 2006, 11:00:50 PM »
I was never able to reproduce it.  must have been changing the caps but everything works fine.

edit:  oh and If it was the opti, I  cleaned all the cables (just wiped them off good, free of any lint etc) and never have had any issues since.
« Last Edit: June 26, 2006, 11:07:06 PM by Gordon »
Microtech Gefell M20 or M21 > Nbob actives > Naiant PFA > Sound Devices MixPre-6 II @ 32/48

https://archive.org/details/fav-gordonlw

https://archive.org/details/teamdirtysouth

Offline Dutchman1101

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2856
  • Gender: Male
Re: noise on tape sunday night. help!
« Reply #24 on: June 26, 2006, 11:15:51 PM »
Cool, thanks for the info.

 

RSS | Mobile
Page created in 0.06 seconds with 36 queries.
© 2002-2024 Taperssection.com
Powered by SMF