Become a Site Supporter and Never see Ads again!

Author Topic: Microtrack Appreciation Thread  (Read 7661 times)

0 Members and 1 Guest are viewing this topic.

Offline scoper

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 177
  • Gender: Male
Microtrack Appreciation Thread
« on: October 23, 2006, 03:45:28 PM »
I've had my MT since March - taped maybe 20 shows. Never an issue with it not caused by human error.

Runs great with my AT853 thru the SP battery interface which runs the input through the 1/4" jacks. Mic preamp isn't bad, unless it's a dead quiet show, in which case an outboard preamp is a good idea. Meters are easy to use once you get used to them, buttons are easy to find in the dark.

I don't mind the 2GB limit - I just find a good spot to hit the rec button twice - five seconds at most. I don't run digi-in, so I can't comment on usage as a bit bucket.

The ONLY real nit is battery life, and with my powerrunner 2200 I get a total of nine hours starting with both fully charged. I'd like a smaller batter pack that can use regular alkalines, but I can live without.

For all  the complaints heard in these forums about this and that, I've had nothing but positive experiences.
AT853U cardioid (low sens mod)| Countryman B3 Omni (low sens mod) > CA-UGLY II > Sony PCM-M10

Former: Sony MiniDisc/JB3/MicroTrack/R-09HR

J.T.L

  • Guest
  • Trade Count: (0)
Re: Microtrack Appreciation Thread
« Reply #1 on: October 23, 2006, 05:11:00 PM »
...zero problems as a bit bucket from 1.2.3 to current 1.4.3.

Offline lbgspam

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 202
Re: Microtrack Appreciation Thread
« Reply #2 on: October 23, 2006, 08:48:44 PM »
lol, not a lot of responses. Not feeling the love are we? :)
j/k! :D

Offline anhisr

  • Trade Count: (6)
  • Needs to get out more...
  • Posts: 2974
  • Gender: Male
Re: Microtrack Appreciation Thread
« Reply #3 on: October 23, 2006, 08:51:19 PM »
Using as a bit bucket.  No problems. 
Audio: Neumann KM 100> 20, 30, 40, 43 or 50 > V3 > MT II (love that M/S)
Still Camera Body: Canon D5 Mark II
Canon Lenses:  16-35mm f2.8L II USM; 28-135mm f3.5-5.6 IS USM; 70-200mm f2.8L IS USM
Video Canon HF R30

archive  http://www.archive.org/bookmarks/anhisr

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re: Microtrack Appreciation Thread
« Reply #4 on: October 23, 2006, 08:57:30 PM »
Using as a bit bucket.  No problems.

Yup, same here.  Well, used, anyway, but not since I picked up my R-4.
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline hijoq

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 13
  • Gender: Male
    • My trading website
Re: Microtrack Appreciation Thread
« Reply #5 on: October 24, 2006, 03:32:58 AM »
Taped many shows since march 2006 and never had a problem. Works great.
DPA4061s + MPS6030 + Edirol R09/Tascam DR2D

Offline cybermansrev

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 121
Re: Microtrack Appreciation Thread
« Reply #6 on: October 24, 2006, 04:40:28 AM »
I'll stick up for this piece of kit as well, served me well for past 6/12. Only problems have been media related, serves me right for using a microdrive.

Offline shruggy1987

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 323
  • Gender: Male
  • Team Ithaca
Re: Microtrack Appreciation Thread
« Reply #7 on: October 24, 2006, 04:59:27 AM »
I've had my MT since November '05 and it has never once given me a single problem.  I've used it as mic/line in and now I use it as a bit bucket.  I have no complaints whatsoever.  I run this unit until it dies!

SP LSD2 > bm2 UA-5 (coax out) > M-Audio Microtrack
SP LSD2 > bm2 UA-5 > MacBook Pro

Offline bconnolly

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1567
  • Gender: Male
  • Serious Business
    • Serious Business
Re: Microtrack Appreciation Thread
« Reply #8 on: October 24, 2006, 07:24:06 AM »
Only had one issue with this device ever and it very well might have been my fault.

Dozens of shows taped with it since January of this year.  Most of them S/PDIF but a handful using the 1/4" inputs.  Always works great.

Offline silentmark

  • Shine with or without cherries ?
  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 2685
  • Gender: Male
  • Boat, cucumber, wire ...
Re: Microtrack Appreciation Thread
« Reply #9 on: October 24, 2006, 07:55:51 AM »
I will also give props to the MT. Sure there were some growing pains, just like any piece of gear, but it runs like a champ for me.  Lots of haters out there with nothing better to do, but hate on it or they just spew to get their post count up  :P
Dissent is the highest form of patriotism. - Howard Zinn, not Thomas Jefferson ...

Mics: Neumann AK50/AK40/AK30/AK20(1 for M/S), AKG568eb's (gathering dust)
Decks: R-44 (OCM), Fostex FR2LE (OWM), Microtacker (semi-retired), D8 (retired), D7 (retired)
Pre-amps: Apogee Minime (semi-retired), Sonosax SX-M2 (semi-retired), Oade mod SBM-1 (retired)
Cables: LC3 actives (older lemo style x2), Audio Magic Hyper Conductor interconnects

http://www.youtube.com/watch?v=J3qrWOOposQ

Offline branas

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 81
  • Gender: Male
Re: Microtrack Appreciation Thread
« Reply #10 on: October 24, 2006, 10:14:48 AM »
No problems here either  :)
Mobile - C414B-XLS/ST->V3->744T
Home/Studio - Various Mics->RNP/Vintech Dual72/Focusrite OctoPre->Digi002->ProToolsLE

Offline willndmb

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 6792
  • Gender: Male
Re: Microtrack Appreciation Thread
« Reply #11 on: October 24, 2006, 10:25:46 AM »
no probs with mine both coax and 1/4
Mics - AKG ck61/ck63 (c480b & Naiant actives), SP-BMC-2
XLR Cables - Silver Path w/Darktrain stubbies
Interconnect Cables - Dogstar (XLR), Darktrain (RCA > 1/8) (1/8 > 1/8), and Kind Kables (1/8f > 1/4)
Preamps - Naiant Littlebox & Tinybox
Recorders - PCM-M10 & DR-60D

Offline bewildered

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 80
Re: Microtrack Appreciation Thread
« Reply #12 on: October 24, 2006, 01:46:20 PM »
Anyone know if the MT came with any warranties? It just occured to me that usiing a $400 item that is meant to be ported around is quite a gamble.

Offline coloartist

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2067
  • MGoldey -"you can shove those mics up your ass
Re: Microtrack Appreciation Thread
« Reply #13 on: October 24, 2006, 03:36:23 PM »
Anyone know if the MT came with any warranties? It just occured to me that usiing a $400 item that is meant to be ported around is quite a gamble.

I have no idea what that means. Ported around.

Mine has worked great. Only problem was with Firmware 1.3.3, and a Transcend CF card the MT didn't like.

Works great with my Kingston cards.
mk4>Kwon/din a/din>kc5>cmc6>kindkables XLR>788T
mk22>Kwon/NOS>kc5>cmc6>kindkablesXLR>788t                                                     
Canon XH-A1 Sony AX100                       
Samsung Backlit LED 55">Pioneer Elite SC-27>Snell Acoustics E.5  Series

Offline svenkid

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3564
  • Gender: Male
  • Take Time to Listen!
Re: Microtrack Appreciation Thread
« Reply #14 on: October 24, 2006, 04:34:55 PM »
all worked well. minus user errors, until the last show, where I got digi static from the recording that was NOT present on the jb3 back up.Im still going to be running it tomarrow night though...the plan is to use it exclusively as a 24 biter.
Seriously, the band makes the music. Tapers just point mics in the right direction and hit "record".

That's good to hear!  The last patcher I had complained about my AKGs, fluffed schoeps for about 15 minutes, stayed patched in, and farted on me all night long.
rig: Neuman u89s > Lunatec V3 > MT(24)/JB3(16)
http://db.etree.org/svenkid

Um, in my room, one seam is a little off and I stare at it constantly. It's, like, destroying me.

 

RSS | Mobile
Page created in 0.076 seconds with 39 queries.
© 2002-2024 Taperssection.com
Powered by SMF