Become a Site Supporter and Never see Ads again!

Author Topic: Need a small stand for stage-lip taping.  (Read 3671 times)

0 Members and 1 Guest are viewing this topic.

Offline chinariderstl

  • Trade Count: (43)
  • Taperssection All-Star
  • ****
  • Posts: 1260
  • Gender: Male
    • https://chris-finn.com/
Need a small stand for stage-lip taping.
« on: February 23, 2013, 10:30:30 AM »
Hi, I need a small stand for acoustic stage-lip-esque taping, i.e.: right up front.  Any thoughts on this, before I pull the trigger?  Seems to be about what I need.

# Manfrotto 5001B Nano Black Light Stand - 6.2' (1.9m)
http://www.bhphotovideo.com/c/product/612771-REG/Manfrotto_K5001B_5001B_Nano_Black_Light.html
Mics: Audio-Technica AT853's, Avantone CK-40 (Busman mod), Busman BSC1's, DPA 4022's, DPA 4060's
Pres: Apogee Mini-MP, Core Sound Battery Box
Decks: Sony PCM-M10, Tascam DR-2D, Tascam DR-680 (Busman mod)
Power: Initial RB-270, Naztech PB15000
LMA: http://www.archive.org/search.php?query=taper%3A%22Chris+Finn%22

Offline noahbickart

  • phishrabbi
  • Site Supporter
  • Trade Count: (33)
  • Needs to get out more...
  • *
  • Posts: 2554
  • Gender: Male
  • So now I wander over grounds of light...
Re: Need a small stand for stage-lip taping.
« Reply #1 on: February 23, 2013, 11:37:24 AM »
I think this is what they now call what we all know as the 3373.
Recording:
Capsules: Schoeps mk41v (x2), mk22 (x2), mk3 (x2), mk21 & mk8
Cables: 2x nbob KCY, 1 pair nbob actives, GAKables 10' & 20' 6-channel snakes, Darktrain 2 & 4 channel KCY and mini xlr extensions:
Preamps:    Schoeps VMS 02iub, Naiant IPA, Sound Devices Mixpre6 I
Recorders: Sound Devices Mixpre6 I, Sony PCM m10

Home Playback: Mac Mini> Mytek Brooklyn+> McIntosh MC162> Eminent Tech LFT-16; Musical Fidelity xCan v2> Hifiman HE-4XX / Beyerdynamic DT880

Office Playback: iMac> Grace m903> AKG k701 / Hifiman HE-400

Offline chinariderstl

  • Trade Count: (43)
  • Taperssection All-Star
  • ****
  • Posts: 1260
  • Gender: Male
    • https://chris-finn.com/
Re: Need a small stand for stage-lip taping.
« Reply #2 on: February 23, 2013, 11:41:43 AM »
Sooo... Good? Bad? Indifferent?  Seems pretty right on to me.
Mics: Audio-Technica AT853's, Avantone CK-40 (Busman mod), Busman BSC1's, DPA 4022's, DPA 4060's
Pres: Apogee Mini-MP, Core Sound Battery Box
Decks: Sony PCM-M10, Tascam DR-2D, Tascam DR-680 (Busman mod)
Power: Initial RB-270, Naztech PB15000
LMA: http://www.archive.org/search.php?query=taper%3A%22Chris+Finn%22

Offline bryonsos

  • Omni addict
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 2061
  • Gender: Male
  • If it's important, tell me to write it down.
    • LMA uploads
Re: Need a small stand for stage-lip taping.
« Reply #3 on: February 23, 2013, 11:47:17 AM »
I have a couple of these:

http://www.bhphotovideo.com/c/product/400089-REG/On_Stage_MS7920B_MS7920B_Kick_Drum.html

Some bands and sound guys seem to appreciate the smaller base. I usually gaff it down if I'm worried that someone might bump it.
Mics: 3 Zigma Chi HA-FX (COL-251, c, h, o-d, o-f) / Avenson STO-2 / Countryman B3s
Pres: CA-Ugly / Naiant Tinyhead / SD MixPre
Decks: Roland R-44 / Sony PCM-M10
GAKables
Dead Muppets

My recordings LMA / BT / TTD

Offline achalsey

  • Trade Count: (29)
  • Needs to get out more...
  • *****
  • Posts: 2184
Re: Need a small stand for stage-lip taping.
« Reply #4 on: February 23, 2013, 12:16:47 PM »
I think ideally, I'd prefer the drum base like the one Bryonsos linked but without the boom arm.

I've got one of these that works just fine, and the price is right.  Didn't look hard enough to find a listing with just one.

http://www.ebay.com/itm/2-PCS-Photo-Video-Backlight-Backgroud-Stand-801-/251096468318?pt=LH_DefaultDomain_0&hash=item3a76840b5e
« Last Edit: February 23, 2013, 12:23:24 PM by achalsey »

cashandkerouac

  • Guest
  • Trade Count: (0)
Re: Need a small stand for stage-lip taping.
« Reply #5 on: February 23, 2013, 01:50:22 PM »
I think ideally, I'd prefer the drum base like the one Bryonsos linked but without the boom arm.

I've got one of these that works just fine, and the price is right.  Didn't look hard enough to find a listing with just one.

http://www.ebay.com/itm/2-PCS-Photo-Video-Backlight-Backgroud-Stand-801-/251096468318?pt=LH_DefaultDomain_0&hash=item3a76840b5e

i like those.   :)

Offline ScoobieKW

  • Trade Count: (3)
  • Taperssection All-Star
  • ****
  • Posts: 1664
    • ScoobieSnax Audio Archive
Re: Need a small stand for stage-lip taping.
« Reply #6 on: February 23, 2013, 02:15:46 PM »
I use a round base table stand. not as tall as a kick drum stand, works well for split omnis. Stable with two SDC on a stereo bar.

http://www.americanmusical.com/Item--i-MUS-DS7200B-LIST?src=Y0802G00SRCHCAPN&gclid=CKOawumRzbUCFUeCQgodxnsA8w

Busman BSC1, AT853 (O,C),KAM i2 Chuck Mod (C), Nak 300 (C),
M10, UA-5, US-1800, Presonus Firepod

http://kennedy-williams.net/scoobiesnax/

Offline aaronji

  • Site Supporter
  • Trade Count: (9)
  • Needs to get out more...
  • *
  • Posts: 3894
Re: Need a small stand for stage-lip taping.
« Reply #7 on: February 23, 2013, 03:28:18 PM »
I have been using a pair of these for splitting omnis on-stage:  http://www.bhphotovideo.com/c/product/505123-REG/K_M_25950_500_55_25950_Low_Level_Microphone.html.  They can be used without the pictured boom for a height of  ~12" with a mic clip attached.  Considerably higher with the boom.  The build quality is excellent.  The only drawback is that they are quite heavy.

I actually bought the K&Ms because I needed something fast and the Manfrottos I had already purchased were back-ordered (http://www.bhphotovideo.com/c/product/325266-REG/Bogen_Manfrotto_012B_Backlight_Stand_with_Extension.html).  I never cancelled the order, so I have those too.  I have used them a few times and think they are good as well.  Not so solid as the K&Ms and with a bigger footprint.  They are more compact, though, and much lighter.  Another plus is that the extension bar can also be used with a Super Clamp...

Offline page

  • Trade Count: (25)
  • Needs to get out more...
  • *****
  • Posts: 8388
  • Gender: Male
  • #TeamRetired
Re: Need a small stand for stage-lip taping.
« Reply #8 on: February 23, 2013, 06:11:22 PM »
I have two 5001b stands, one had the normal setup and the other has legs that are half the size. The smaller one has a max height that is about 18" less, but I can use it onstage rather easily. I can post pics when I get home. Got it custom cut from my rep at pro-sound.
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: Need a small stand for stage-lip taping.
« Reply #9 on: February 23, 2013, 09:02:48 PM »
I have a 6' Bogen/manfrotto fob stand that works great for stage lip/onstage taping!
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline tim in jersey

  • Site Supporter
  • Trade Count: (8)
  • Needs to get out more...
  • *
  • Posts: 3796
  • Gender: Male
Re: Need a small stand for stage-lip taping.
« Reply #10 on: February 23, 2013, 11:09:49 PM »
I use an old-school 3373 (replaced by the Bogen Nano) and chopped the legs in half to reduce the footprint for FOB/stage-lip/onstage.

I'd like to get a 2nd 3373/Nano and not chop the legs for certain situations but can't justify the cost yet.

I've seen some sweet, sub-4' light-stands on-stage recently that have a very small footprint. Maybe 12"-14".

Damn you, OP for having me think about multi-track possibilities...

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: Need a small stand for stage-lip taping.
« Reply #11 on: February 23, 2013, 11:56:42 PM »
Tim I think I have the 3373 too. Great ill stand. I've only used it onstage so far tho
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline bugg100

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1015
  • Gender: Male
Re: Need a small stand for stage-lip taping.
« Reply #12 on: March 25, 2013, 05:52:45 PM »
I use a round base table stand. not as tall as a kick drum stand, works well for split omnis. Stable with two SDC on a stereo bar.

http://www.americanmusical.com/Item--i-MUS-DS7200B-LIST?src=Y0802G00SRCHCAPN&gclid=CKOawumRzbUCFUeCQgodxnsA8w



I use the same with a Shure vertical stereo mount A27M. Great combination!

http://www.bhphotovideo.com/c/product/68616-REG/Shure_A27M_A27M_Stereo_Stand_Adapter.html

Offline George2

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 312
  • Gender: Male
Sennheiser 418s>SDMixPre-D>RO9HR
Beyer MC930>Fostex FM3>NagraSD
Couple of Schoeps CMT441 too.

 

RSS | Mobile
Page created in 0.107 seconds with 39 queries.
© 2002-2024 Taperssection.com
Powered by SMF