Become a Site Supporter and Never see Ads again!

Author Topic: Mytek 192 Lithium ion ideas....  (Read 18525 times)

0 Members and 1 Guest are viewing this topic.

Offline jadedphan

  • gear owned:
  • Trade Count: (5)
  • Taperssection Regular
  • **
  • Posts: 199
  • Gender: Male
  • at one with the cosmic rhythms
    • seeded recordings found on: - search jadedphan
Mytek 192 Lithium ion ideas....
« on: May 31, 2011, 05:51:16 PM »
Hey now,

Well, it's been increasingly harder to find a 5400 mAh portable dvd battery (suggestions welcome for purchase sites).  Any other remote power ideas for a mytek 192?

mics: schoeps mk4v, mk41v (matched), mk22 (matched) , mk41 (matched), mk22 (not part of matched pair)/MK8 (mid/side); neumann u89i, neumann km150

preamps: aeta psp3, schoeps vms02ib, vms5u x 2, sonosax sx-m2, sx-m2d2;

recorders: sound devices: mixpre 6ii, mixpre 10ii; sony: d7 & d8, tascam da-30mkii

mic bodies: schoeps cmc1L x 4,  neumann km100

actives/specialty cables: ak2Lsu x 14, aksu2ta3 x 6,  aksu2u x 8, 5m nbobs actives (schoeps version), kcy x 2, k5s (5pin stereo) x 10 @ 5m; custom 5 pin 9’, 16’, 12’ (x2), k5Lsu (x 6), nbobs actives (schoeps), custom km100 actives

Offline audBall

  • Trade Count: (37)
  • Needs to get out more...
  • Posts: 6509
  • Gender: Male
  • Feel brand new about it
Re: Mytek 192 Lithium ion ideas....
« Reply #1 on: May 31, 2011, 05:55:38 PM »
Tekkeon MP3450?

Powerstream also makes a Tekkeon clone.  I suggest scouring ebay for one.  I recently scored a MP3450 clone plus extended pack for only $20. 
mg m20.21.23 ■ akg ck61.62.63 »  nbob■naiant
aercomp2 ■ v2∞3 ■ sx-m2d2
pcm-d100 ■ pmd661 ■ r44ocm ■ f3

Offline page

  • Trade Count: (25)
  • Needs to get out more...
  • *****
  • Posts: 8388
  • Gender: Male
  • #TeamRetired
Re: Mytek 192 Lithium ion ideas....
« Reply #2 on: May 31, 2011, 08:33:28 PM »
whats the tolerance range on voltage? Something from might work if you get it re-terminated to whatever the mytek receives.
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

Offline yug du nord

  • ...til things never seen seem familiar…
  • Trade Count: (56)
  • Needs to get out more...
  • *****
  • Posts: 5537
  • made with natural flavor
Re: Mytek 192 Lithium ion ideas....
« Reply #3 on: May 31, 2011, 10:55:20 PM »
Mytek is very flexible...............   find a 9v DVD or pick up a Tekkeon and set it to 9v.  Mytek recommends using the lowest voltage possible. a blank space where my mind should be.....

Offline jerryfreak

  • No PZ
  • Trade Count: (31)
  • Needs to get out more...
  • *
  • Posts: 6205
  • The plural of anecdote is not data
Re: Mytek 192 Lithium ion ideas....
« Reply #4 on: October 09, 2013, 03:20:37 AM »
i know this thread is super old, so call me late to the party as a new mytek owner

im getting 12 hours out of this palm-sized battery:

thats running 8.4>6.9V. it hit 7V after 11 hrs. im not sure at what voltage the internal rail voltage dips and affects performance, but im guessing 6.9V is fine for the extremely rare case i would go that deep (it sounded fine at least)

id go for the 2.4 aH battery but this one is already tiny and its cool to have one battery for a whole day at a festy

by my calcs this unit uses about 400 mA (2.8W). pretty efficient compared to the AD2K's 9W but in terms of weight with Li-ions the mytek setup is still heavier as the unit weighs twice as much as the ad2k

« Last Edit: October 09, 2013, 03:25:46 AM by jerryfreak »
Unable to post or PM due to arbitrary censorship of people the mod doesn't like. Please email me using the link in my profile if you need to connect


RSS | Mobile
Page created in 0.068 seconds with 29 queries.
© 2002-2024
Powered by SMF