Gear / Technical Help > Cables

Does ANYONE know the model # of the old Sony Coax In/Out & 7-Pin active cable?

<< < (2/3) > >>

Sebastian:
Sony had the RM-D100K for coax i/o. Here's the relevant section from the manual of a Sony PCM-M1 that mentions it. (source).

jefflester:
The RM-D100K was an AC powered unit for home use, unlikely to be used for patching at a show. Far more than just a cable. We're still not quite sure what Bean's goal is here, but it sounded to me like trying to fully document master DAT sources, but for the original recording itself or the transfer or ??

https://www.sony.com/electronics/support/res/manuals/W000/W0009229M.pdf

F.O.Bean:

--- Quote from: jefflester on September 10, 2024, 01:07:33 PM ---The RM-D100K was an AC powered unit for home use, unlikely to be used for patching at a show. Far more than just a cable. We're still not quite sure what Bean's goal is here, but it sounded to me like trying to fully document master DAT sources, but for the original recording itself or the transfer or ??

https://www.sony.com/electronics/support/res/manuals/W000/W0009229M.pdf

--- End quote ---

Jeff, correct. Just wanting to name my old masters properly than stating "Sony Coax/7-Pin Digital Cable"


--- Quote from: adamz on September 07, 2024, 02:51:11 PM ---Sony never made an I/O coax for the 7 pin cord. I had a D7 and Denon DTR 80P (which had it's own whacky ass digi cable...a three ring 1/8" to a coax I/O)
Sony made a coax IN only with 7 pin, and an In and Out with the optical connectors to the 7 pin (I had this cord for patching to my 3800).
OADE made us the In and Out coax cords to the 7 pin connector. And they were in the $150 range in the early 90's. It was a straight in 7 pin (not 90 degree like sony made) and a silver Y at the other end with a white and red female RCA. I don't recall which was In and which was Out. Which reminds me of two baby skunks living near Alpine one year named In and Out. They both went out one day but only Out returned ontime for dinner. When Mama skunk asked Out "Where is In?" Out simply shrugged. Mama skunk went out and promptly found In and brought him back home to be with Out. How did Mama skunk find In so quickly you ask?...
In-stinked.
My D7 was always last in the chain as a result of me not getting the OADE cable.
Hope that helps,
AZ

--- End quote ---

Actually, I'm 1,000% correct it was a genuine Sony cable. It had a Coax In -> 7-Pin connector -> Coax output. The 7-Pin portion had a grey housing, right angle, with the analog/digital switch, and that's where the Coax "Y" cable was. I'm going to search HARD for the pics to the cable or the package it came in itself. Just no luck thus far. I bought it from Marc @ Sonic Sense or Terrapin Tapes, because at the time (circa 1998) I had never even heard of the Oade Brothers, so it DEF wasn't one of theirs. Not to mention, I have a ROCK SOLID memory believe it or not, and I KNOW it was a Sony Coax In/Out -> 7-Pin cable. It even had the Sony name embedded into the ends of the coax connectors.

I DID have the other Sony Coax IN ONLY -> 7-Pin cable as well, and according to online, it was called the Sony RK-DA10. So I ASSUMED the Coax IN/OUT version would be called the RK-DA10P.

In a nutshell, this is what I had, EXCEPT with two coax connectors, and it was MUCH cleaner. I believe the Coax OUT was actually further up towards the Coax IN connector, and NOT a perfect Y-Split ?!?!?!

https://www.worthpoint.com/worthopedia/sony-poc-da12-optical-digital-cable-1778816642

https://www.sony.co.uk/electronics/support/res/manuals/3859/38599271M.pdf



HOWEVER, this is what mine looked like, except it had Coax IN/OUT.

https://www.springair.de/en/sony-rk-da10-digital-cable-and-microphone-cable/h55388

And since the POC-DA12P has Optical IN/OUT, I just ASSUMED that the coax version, RK-DA12, would have the "P" suffix attached to it, making it the RK-DA12P, which was MADE by Sony AND had coax Ins & Outs.........Common sense would lean that way at least LOL

I DO know that I could be placed ANYWHERE in the chain until I bought my own 481/AM X-Streams/DMIC-20 back in 1999, without affecting any of the other rigs, So I DID NOT need to be put at the end of the chain for whatever reason. Meaning mine was an "Active" cable, correct? I believe that bypassed SCMS too. Not very clear on any of that though :)

I just want to thank everyone for taking the time to pop in and post on this thread. I ALWAYS kept packages of everything I bought, so maybe one lucky day when I'm cleaning my parents house out, I'll find the damn packaging for BOTH Sony 7-Pin cables 8~)

Wishful thinking though. And I'm amazed that in 2024, it's THIS hard to find such information....

AbbyTaper:
Where have you been hiding, Bean?

datbrad:
The cable I got from Doug for my D8 way back in the day was the passive version, made using the Sony branded coax cable, with the single input RCA chopped off and wired to a splitter that passed the signal without routing it through the deck. Think of it as if a pair of coax cables were joined with a RCA F>F coupling connector to extend length. I am 100% certain that the only in-out cable Sony ever made for the D7/D8 was optical. The coax was input only. Hope this helps.

Navigation

[0] Message Index

[#] Next page

[*] Previous page