Become a Site Supporter and Never see Ads again!

Author Topic: Rockbox: no USB-OnTheGo support for H3xx?  (Read 1605 times)

0 Members and 1 Guest are viewing this topic.

Offline sunjan

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2006
  • Gender: Male
  • Taping since 1988, 28 years of fine recordings...
    • Just a handful of stuff I put on etree
Rockbox: no USB-OnTheGo support for H3xx?
« on: March 14, 2008, 08:11:37 AM »
I just got a H340 in addition to my H120, and my idea was to dump my photos on the H340 during festivals.

There is an entry from 2006 on the Rockbox site saying that USB-OTG support hasn't been developed yet:
http://www.rockbox.org/twiki/bin/view/Main/UsbOnTheGoSupport

Did the rockbox guys get it to work in the end?
Otherwise the solution is to boot into the stock Iriver firmware instead.

/J

Here's a good thread covering all the hardware supported by the stock firmware (external card readers, cameras etc):
http://www.misticriver.net/forums/h3xx-series-320-340/38145-list-camera-card-reader-known-work-h300.html
« Last Edit: March 15, 2008, 07:04:24 PM by sunjan »
Mics: A-51s LE, CK 930, Line Audo CM3, AT853Rx (hc,c,sc),  ECM 121, ECM 909A
Pres: Tinybox, CA-9100, UA5 wmod
Recorders: M10, H116 (CF mod), H340, NJB3
Gearbag: High Sierra Corkscrew
MD transfers: MZ-RH1. Tape transfers: Nak DR-1
Photo rig: Nikon D70, 18-70mm/3.5-4.5, SB-800

Offline whatboutbob

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 549
  • A very happy chappy right now...
Re: Rockbox: no USB-OnTheGo support for H3xx?
« Reply #1 on: March 14, 2008, 03:34:52 PM »
They've not gotten to it yet.
Mics: Audix m1290's, AT943's (w/ AT853 C/O/H caps), AT853's
Power: PS-2, Homebrew 3wbb, SPSB-6
Pre/AD: UA-5 (BM2p+), CA-9100, AD-20
Recorder: iriver H120, H160

Offline sunjan

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2006
  • Gender: Male
  • Taping since 1988, 28 years of fine recordings...
    • Just a handful of stuff I put on etree
Re: Rockbox: no USB-OnTheGo support for H3xx?
« Reply #2 on: March 16, 2008, 05:47:11 PM »
They've not gotten to it yet.

+T, thanks for the status update. After reading the threads over at rockbox I doubt they ever will, there is some kind of power sapping going on if the USB-OTG is activated, which shortens battery life. So from a taper's point of view, this function is a bad thing. But as long as I can dual boot, I'll be fine.

So did anyone try this in the field? I can imagine those who run a flash recorder with a small flash card (2-4GB or so) using the H3xx as a backup station for festivals.

My understanding is that you can plug in most USB card readers, and they will take the power from the H3xx, so no need for any external power source for the transfer. Right?
Mics: A-51s LE, CK 930, Line Audo CM3, AT853Rx (hc,c,sc),  ECM 121, ECM 909A
Pres: Tinybox, CA-9100, UA5 wmod
Recorders: M10, H116 (CF mod), H340, NJB3
Gearbag: High Sierra Corkscrew
MD transfers: MZ-RH1. Tape transfers: Nak DR-1
Photo rig: Nikon D70, 18-70mm/3.5-4.5, SB-800

 

RSS | Mobile
Page created in 0.056 seconds with 27 queries.
© 2002-2024 Taperssection.com
Powered by SMF