a word to the wise.............
i left my jb3/walmart adapter/12v hooked up overnite w/ OUT the jb3 connected
so i lewft the damn walmart adapter connected to the 12v while driving overnite from hampton to MASS, and when i went to recharge the jb3, the damn adapter was fried
so kids, put a fuse on the 4-pin end, i am gonna do it once i figure out what rating fuse and whatnot on the 4-pin end
luckily i am handy w/ a soldering iron and whatnot, cause i saved the fried board, i just cut 2 very small guage wires and burried them in solder where the board had fried and a solder path was gone, and the green board was showing where there should have been the silver electrical path
so what im saying is, PUT A FUSE on that 4-pin end, it made taping the rest of the run a real bitch and i couldnt tape the second day coventry w/ my jb3, only a buddies d-8
so guys, lets start a fuse thread or something showing some high-quality fuses we can put in line w/ our jb3 so this doesnt happen to anyone else in critical times, and ALWAYS plug the jb3 end in first, THEN the 4-pin