Become a Site Supporter and Never see Ads again!

Author Topic: DPA4011 Cap Question  (Read 1619 times)

0 Members and 1 Guest are viewing this topic.

Offline audBall

  • Trade Count: (37)
  • Needs to get out more...
  • Posts: 6505
  • Gender: Male
  • Feel brand new about it
Re: DPA4011 Cap Question
« Reply #15 on: June 05, 2024, 01:38:27 PM »
Going off the photo above, I wonder if an adjustable watch cover remover would work. I see you got the issue resolved, but maybe for future instances.

https://www.amazon.com/Adjustable-Wristwatch-Battery-Remover-Opening/dp/B0CTK3RLBB

edit - You'd want to make sure the adjustments can get within the range of the capsule size. Maybe even an old adjustable compass tool for a drafting kit.
« Last Edit: June 05, 2024, 06:47:36 PM by audBall »
mg m20.21.23 ■ akg ck61.62.63 »  nbob■naiant
aercomp2 ■ v2∞3 ■ sx-m2d2
pcm-d100 ■ pmd661 ■ r44ocm ■ f3

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 15870
  • Gender: Male
  • We create auditory illusions, not reproductions
Re: DPA4011 Cap Question
« Reply #16 on: June 05, 2024, 04:59:05 PM »
^ Probably.

Sounds like this will be best resolved by doing it yourself.  Use "purple or blue" Loctite.  You probably don't really need the tool as long as you can remove the adapter ring to apply the thread locking compound.  Apply a drop and tighten by hand.
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline phil_er_up

  • Trade Count: (9)
  • Taperssection All-Star
  • ****
  • Posts: 1267
Re: DPA4011 Cap Question
« Reply #17 on: June 11, 2024, 08:22:29 AM »
Thanks Gutbucket on which loctite to buy. Purchased the blue at Home depot. Used a "lid grip" and twisted the silver threaded insert and got it out. Then applied about one drop of the loctite blue and on the silver thearded insert and screwed it back onto the DPA cap and wiped off any residue. Seems to work fine.

Thanks to all. It is appreciated.
Everyday is a gift. Enjoy each one!
Forward motion bring positive results.

 

RSS | Mobile
Page created in 0.109 seconds with 31 queries.
© 2002-2024 Taperssection.com
Powered by SMF