Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: harmon712 on January 10, 2014, 11:11:32 PM
-
What would the right Tinybox setup be with Busman BSC1?
-
For my Tinybox I contacted Jon directly via the email link on his website. He is very helpful.
-
I run busman bsc1 mics with my Tinybox. Jon made me a cable that has a pair of regular XLR cables for the mic end and a single mini xlr into the Tinybox. The Tinybox output is 3.5mm out so I just a short cable to go 3.5mm in to the line in on my tascam dr2d. The Tinybox and cable provide the phantom power the mics need. The Tinybox is a basic one with the regular high/med/low settings.
This setup works really well for me, I love it.
-
I run busman bsc1 mics with my Tinybox. Jon made me a cable that has a pair of regular XLR cables for the mic end and a single mini xlr into the Tinybox. The Tinybox output is 3.5mm out so I just a short cable to go 3.5mm in to the line in on my tascam dr2d. The Tinybox and cable provide the phantom power the mics need. The Tinybox is a basic one with the regular high/med/low settings.
This setup works really well for me, I love it.
correct
The "normal" tinybox with xlr/48v adaptor cable is all you need
I personally would be sure it's wired to work with other options though such as plug. In mics and or actives
You don't need to buy those adaptor cables if you don't have those types of mics but it will give you options down the road and increase the ability to resell it if you ever lose your mind