Taperssection.com

Gear / Technical Help => Remote Power => Topic started by: Swanny on February 01, 2006, 06:51:58 PM

Title: recomend a 14v voltage regulator
Post by: Swanny on February 01, 2006, 06:51:58 PM

Can someone recomend a 13-14 volt regulator. I want to run 2-9v lithiums wired in series for my AD1000. I know leggedy ran something like this, but hes MIA...

Title: Re: recomend a 14v voltage regulator
Post by: MattD on February 01, 2006, 07:08:21 PM

I assume you're talking about building something yourself. Here's a 12V, 1.5A regulator from TI:
http://focus.ti.com/docs/prod/folders/print/ua7812.html

Page 43 of the AD1000 manual states: "Any good regulated 12 V DC, 1.5 amp linear power supply will sufficiently power the AD-1000." If you're feeding it 18V, this should do nicely.