Become a Site Supporter and Never see Ads again!

Author Topic: Using Marantz PMD-671 line ins.....  (Read 1677 times)

0 Members and 1 Guest are viewing this topic.

Offline achabloop5080

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 13
  • Gender: Male
    • Gianluca Piacenza Official Website
Using Marantz PMD-671 line ins.....
« on: December 14, 2010, 05:42:36 PM »
Hi guys,
I need to record some classical live concerts (piano, chamber and baroque orchestral) using multiple mics...
I have Neumann KM183, Schoeps CMC5 mk21, mk2s and mk4 pairs and I'd like to mix them directly to 2-tracks on the fly using my Mackie 1604 vlz pro (used in this case also as a multi mic preamp)...
I plan to go from Mackie tape outs (rca unbalanced) to my Marantz PMD-671 line ins (rca unbalanced)....
Any problems running unbalanced rca cables (hiss, interferences, saturation etc.) quality wise? And how you consider Marantz AD sonically?
Or should I consider a dedicated 2 channel AD converter (Mytek or Benchmark or Apogee) and go to Marantz recorder through s/pdif?
Thank you

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: Using Marantz PMD-671 line ins.....
« Reply #1 on: December 17, 2010, 08:09:46 PM »
i use the a>d in my 671s all the time. it sounds great.
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

Offline achabloop5080

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 13
  • Gender: Male
    • Gianluca Piacenza Official Website
Re: Using Marantz PMD-671 line ins.....
« Reply #2 on: December 23, 2010, 03:09:37 AM »
Thank you sygdwm for your reply,
may I ask you if you use Marantz 671 mic pres or analog rca ins to enter the a/d converters?

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: Using Marantz PMD-671 line ins.....
« Reply #3 on: December 25, 2010, 01:46:28 PM »
both.
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

 

RSS | Mobile
Page created in 0.038 seconds with 28 queries.
© 2002-2024 Taperssection.com
Powered by SMF