Taperssection.com

Gear / Technical Help => Recording Gear => Topic started by: magickbrother on July 20, 2007, 01:29:48 PM

Title: Tapers Help 722 firewire questions
Post by: magickbrother on July 20, 2007, 01:29:48 PM

Hey now,
I just got back from kc & IA -I taped both shows (140's->722) so here my question
I've borrowed this 722 from brad Z & I'm using a mac. and I can't seem to get the 722 to mount as a hard drive (plug it in pushed stop & HDD buttons it say connecting firewire and nothing happens)
is their some setting I don't have on in the menu something.
I would be very grateful "4" any help
( I'm totally new at this 722 thing)
I want to get these shows up

Title: Re: Tapers Help 722 firewire questions
Post by: tmfraley2 on July 20, 2007, 01:33:53 PM

it shoudl just pop up as an external drive but I have never used mine witha  mac before, but most folks have no issues, just unplug and try again it can picky sometimes, great combo of the 140>722 though!

Title: Re: Tapers Help 722 firewire questions
Post by: thegreatgumbino on July 20, 2007, 01:37:58 PM

Have you downloaded the manual from the SD website & read the section on firewire connections?

Title: Re: Tapers Help 722 firewire questions
Post by: ghellquist on July 20, 2007, 01:52:57 PM

Should be nothing special. Just plug in and run.

But -- if you have 2.x version software/hardware there is a menu choice 82 Firewire Connection which you should set to Computer.
Genarally I like to turn the 722 off, then connect cables and finally turn on the 722, but then I am on a PC:

Gunnar

Title: Re: Tapers Help 722 firewire questions
Post by: F.O.Bean on July 20, 2007, 04:04:54 PM

what firmware do you have installed? I had random firewire problems until the latter firmwaqre versions. try 2.15 and Id imagine it will lock on and read the drive without problems...

Title: Re: Tapers Help 722 firewire questions
Post by: terrapinj on July 21, 2007, 03:24:41 PM

 problem could also be either your firewire card or cable, try another device or another cable to double check

Title: Re: Tapers Help 722 firewire questions
Post by: boojum on October 12, 2007, 11:53:45 AM

Xferring the files is a copy function on the menu list.  I do not have my manual by the 'puter.  Try and D/L the one at the SD site.  Maybe someone else can help you, but if you are in a rush D/L'ing the manual will work.

Cheers

Title: Re: Tapers Help 722 firewire questions
Post by: boojum on October 12, 2007, 06:25:03 PM

Quote from: raoulduke on October 12, 2007, 12:40:11 PM

Quote from: raoulduke on October 12, 2007, 11:05:54 AM

in the mean time, can i transfer files off my 722 hard drive onto a cf card placed in the slot on the 722?  if yes, can someone walk me through it?

thanks for the help boojum. i found the walk through in the manual, which i've read a few times already and never noticed this mentioned  ::)
until i figure out my connection issues this will be an ok workaround

Anytime.  Any friend of Hunter Thompson's is a friend of mine.  8)

Title: Re: Tapers Help 722 firewire questions
Post by: F.O.Bean on October 13, 2007, 09:18:11 PM

Tim, get a QUALITY FW Cable AND a QUALITY FW CArd and you should be good to go 8)

Good luck!

Bean