Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: bassmaniu on February 28, 2004, 11:50:44 PM

Title: "crackling" in a recording...
Post by: bassmaniu on February 28, 2004, 11:50:44 PM
On two occasions in the past 6 six shows I've noticed a crackling in the recording.  I have no idea where this could occur.  The only thing I can think of would be the mic cables...any ideas?

Corey
Title: Re:"crackling" in a recording...
Post by: jpschust on February 28, 2004, 11:51:41 PM
corey, sounds like a cable issue- check all your cables, esp your digi cables
Title: Re:"crackling" in a recording...
Post by: Scuba Jeremy on February 29, 2004, 03:11:12 AM
Low battery on your a/d? I've had that happen before.
Title: Re:"crackling" in a recording...
Post by: F.O.Bean on February 29, 2004, 03:17:28 AM
whats your setup???
Title: Re:"crackling" in a recording...
Post by: tchoub on February 29, 2004, 07:18:31 AM
same problem here...
I'm running Oktava mk012 > PS2 > AD20 > Sharp MDMT877.
The MD and the AD20 are connected thanks to an optical cable that came with the MD when I bought it.
All the accessories are new...
"Quiet" cracklings can be heard sometimes in the recording.
Title: Re:"crackling" in a recording...
Post by: Crimson on February 29, 2004, 09:22:29 AM
Octava and Sharp, badass brotha, badass.
Title: Re:"crackling" in a recording...
Post by: tchoub on February 29, 2004, 12:34:03 PM
Octava and Sharp, badass brotha, badass.
My Sharp MD works really well and has never caused any problems.
In my opinion, the oktava produce really great tapes for the price ...

So, a little explanation would be useful...
Title: Re:"crackling" in a recording...
Post by: BobW on March 03, 2004, 06:59:56 PM
In New Orleans cracklin' is deep-fried pig's skin.
Unhealthy for eatin' and in recordings.
Title: Re:"crackling" in a recording...
Post by: bassmaniu on March 04, 2004, 01:54:20 AM
is there a way i can fix this crackling in the recording?  i use cool edit pro...

Corey
Title: Re:"crackling" in a recording...
Post by: muj on March 04, 2004, 11:15:03 AM
i had some crackling and pops(again!) from my tape yesterday.
it's my v3 which is acting up,since everything else in the chain was different than last time
Title: Re:"crackling" in a recording...
Post by: Brian Skalinder on March 04, 2004, 11:20:00 AM
i had some crackling and pops(again!) from my tape yesterday.  it's my v3 which is acting up,since everything else in the chain was different than last time

Checked your power cable connection lately - the pin issue?  When my pins start to pinch together, I get pops (though haven't had any crackling).  Now, instead of waiting for the problem, I just space the pins every so often as a preventive measure.
Title: Re:"crackling" in a recording...
Post by: muj on March 04, 2004, 11:27:41 AM
yep.checked it last time.

thanks for reminding..i'll need to do it again.
:)