Taperssection.com
Gear / Technical Help => Ask The Tapers => Topic started by: bagtagsell on November 17, 2003, 10:05:52 AM
-
Thanks for all the help thus far. Does anyone recommend any t bars, or where to get them?
Also are mic clamps only for balcony situations or do they have other applications?
Finally, Recommends for Akg 391 shockmounts?
Thanks again
-
Ahem. :P Check the Archival Info forum for some popular options: t-bars (http://www.taperssection.com/yabbse/index.php?board=14;action=display;threadid=2458), shockmounts (http://www.taperssection.com/yabbse/index.php?board=14;action=display;threadid=2457), clamps (http://www.taperssection.com/yabbse/index.php?board=14;action=display;threadid=2456).
Some of the common taper online retailers: Masterpiece AV, Sonic Sense, Oade Bros, Cascade Media. Or check your local music equipment supply store.
Clamps are useful in all sorts of situations - balconies, other tapers' stands, tables, stage lips, chairs, etc. IMO, all tapers should have at least 1 clamp.
-
probably in archive like brian says, but here ya go
t-bar akg km-235
shocks Autdio technica 8410
clamps here's mine (http://store.yahoo.com/cinemasupplies/2mmicmoun.html)
windscreens Shure (http://www.shure.com/accessories/a81ws.asp?P=acc-windscreens&PN=Windscreens)
jr
-
Overkill perhaps:
http://www.wesdooley.com/z-p/ds_SMP_and_Decca.html
Terry
-
Yeah, those bars are nice - 1.25 meters wide??? but damn check out those prices!!! The 17 inch bar was $245...
I found a normal wide bar with 4 screwies for mics on EBAY and here (they are the same thing):
http://www.audiogear.com/OstsMicAcc.html
I got one of those Sonci Sense AKG guys, but I'm not a fan of the swing-arms held by nuts only... If I do anything vert, the arms swing down due to gravity...
I've even thought of getting some local metalworker to make some for me...
Terry
-
where'd you get that thing Mike?
-
www.micworks.com
This is my local pro shop that is about 10 minoutes from home.
They are certainly more expensive, but totally convenient to me. (still only $17.50ish) This is a totally cheap stamped metal bar, that is even slightly bowed from being stamped out! cheap stuff, but it works!
One of those AEA bars would be soooooo sweet though. :happylove:
Decca Tree bars also!! (dreaming for now.....)
I have one of the AEA stands... that thing's a f*ckin' tank!
-
One of those AEA bars would be soooooo sweet though. :happylove:
Decca Tree bars also!! (dreaming for now.....)
http://www.wesdooley.com/z-p/Microphone_Array_Positioners.html
A grand for one of these???? I wouldn't pay that much for one of those even if i won the lottery! Why do these things cost so much? Are they made out of platinum or something?
Brian