Become a Site Supporter and Never see Ads again!

Author Topic: newbie question - all these dang taping acronyms?  (Read 7320 times)

0 Members and 1 Guest are viewing this topic.

Offline ozarkbilly

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 617
  • Gender: Male
newbie question - all these dang taping acronyms?
« on: February 07, 2008, 08:46:03 PM »
So I'm just getting into the hobby and I'm seeing all sorts of acronyms, for anything from mic placement to torrent sites.  Anyone, please feel free to throw out a taping acronym and what it stands for.  I would appreciate it.  ;D

Offline rhinowing

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 4240
  • Gender: Male
    • SPLRA - Smashing Pumpkins Live Recording Association
Re: newbie question - all these dang taping acronyms?
« Reply #1 on: February 07, 2008, 08:59:50 PM »
FoB - front of board. This means that the taper stood in front of the soundboard (where the mix is usually the best)
Please contact me if you've ever taped the Smashing Pumpkins or a related group!

Offline darby

  • Trade Count: (108)
  • Taperssection All-Star
  • ****
  • Posts: 1357
  • Support artists and venues that allow recording
Re: newbie question - all these dang taping acronyms?
« Reply #2 on: February 07, 2008, 09:33:03 PM »
DFC...
Dead
Fucking
Center

Offline anarkust

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 305
  • Gender: Male
Re: newbie question - all these dang taping acronyms?
« Reply #3 on: February 07, 2008, 09:42:13 PM »
KMFDM = Kill Mutha Fuckin Depeche Mode

Gabriel

Offline jkbyram

  • Taperssection Underachiever
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4552
« Last Edit: February 07, 2008, 09:47:14 PM by jkbyram »

nameloc01

  • Guest
  • Trade Count: (0)
Re: newbie question - all these dang taping acronyms?
« Reply #5 on: February 07, 2008, 10:54:36 PM »
TRSBD                                                this recording should be destroyed

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re: newbie question - all these dang taping acronyms?
« Reply #6 on: February 07, 2008, 11:06:19 PM »
Keep in mind that many tapers use these terms loosely.  For example, FOB (Front of Board).  In some venues, the whole venue is FOB, so noting the recording as "FOB" doesn't tell the user much of anything.  In other venues, the board is waaaaaay the hell back, a loooooong ways from the stage, so FOB doesn't tell you much.  Similar with DFC.  I've seen tapers label their recordings "DFC" when they're ~15' off center in a venue that's only 40' wide.  In other words, take 'em - especially those two - with a grain of salt.

The mic configurations, like XY, MS, DIN, DINA, ORTF, NOS, AB, are worth learning, and trying, as a reference point.  Then based on what you find, tweak your mic configurations as necessary for the specific recording scenario in which you find yourself.  This takes time, so have fun while you're doing it.  :)  Cue boojum to reference the Stereophonic Zoom in 3...2...
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline cybergaloot

  • Trade Count: (7)
  • Needs to get out more...
  • *****
  • Posts: 4079
  • Gender: Male
  • Poohbah!
Re: newbie question - all these dang taping acronyms?
« Reply #7 on: February 07, 2008, 11:46:06 PM »
PAS = Point At Stacks

The abbreviations you see in lineages most often will be model numbers of mics, preamps or recorders. And sometimes they aren't easy to decode.

A good book that will help is Bartlett & Bartlett's "Recording Music on Location." Most of the info and even parts of the book are spread here and there on the web but its nice to have things in one volume that you can read while sitting on the John. The Appendix is worth the cost alone ($22.99, probably cheaper if you look around). All those mic arrangement acronyms are covered in detail. ORTF, NOS & DIN (& DINa) are not acronyms for English words so don't hurt your head trying to figure them out (unless you speak French, Dutch & German), just learn what they represent.
--
Walter

Everybody is ignorant, only on different subjects. Will Rogers

this>that>the other

Offline jeromejello

  • Team Florida - always brings the heat
  • Trade Count: (9)
  • Needs to get out more...
  • *****
  • Posts: 3514
  • Gender: Male
  • surly tapir
Re: newbie question - all these dang taping acronyms?
« Reply #8 on: February 08, 2008, 01:11:24 AM »
kfc

kentucky fried chicken

and there are a bunch of zman inspired notations as well if you are interested in really telling the leechers whats up.
open: mbho 603a (ka200n/ka500hn) > SD MP-2 > PCM-M10
stealth: AT853a (o/sc/c/h) > SD MP-2 > ihp120
misc: Earthworks SR77 | Shure VP88

bt & dime

Offline bhtoque

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 3308
  • Gender: Male
  • So much music, so little time.
Re: newbie question - all these dang taping acronyms?
« Reply #9 on: February 08, 2008, 02:14:06 AM »
kfc

kentucky fried chicken

and there are a bunch of zman inspired notations as well if you are interested in really telling the leechers whats up.

Actually KFC stands for Keep Fucking Cooking.

JAson
MG 200/210/270
AKG c422>s42>Hydra silver interconnects
AKG 391/92/93>MK 90/3 actives
>AM Hyper-Conductors
Studio Projects LSD2>MiAGi II
>Edirol R-4 (Oade T Mod)

db.etree.org/bhtoque

Offline Dede2002

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1217
  • Gender: Male
Mics..........................SP-CMC-8, HLSC-1 and HLSO-MICRO
BB and Preamps........MM Micro bb / MM Custom Elite bb / Church 9100
                              
Recorders...................Tascam DR-100MKIII, Marantz PMD 620 MKII, Edirol R-09

Offline ozarkbilly

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 617
  • Gender: Male
Re: newbie question - all these dang taping acronyms?
« Reply #11 on: February 08, 2008, 09:14:53 AM »
Excellent!  Thanks for all the replies and the links  8)

Offline stantheman1976

  • Trade Count: (2)
  • Taperssection All-Star
  • ****
  • Posts: 1093
Re: newbie question - all these dang taping acronyms?
« Reply #12 on: February 08, 2008, 01:03:21 PM »
What about QFT?  I've seen that a lot and still don't know what it stands for.

Offline bgalizio

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 3555
  • Gender: Male
    • http://www.archive.org/bookmarks/spyboychoir
Re: newbie question - all these dang taping acronyms?
« Reply #13 on: February 08, 2008, 01:03:46 PM »
What about QFT?  I've seen that a lot and still don't know what it stands for.

Quoted for truth.

Offline jeromejello

  • Team Florida - always brings the heat
  • Trade Count: (9)
  • Needs to get out more...
  • *****
  • Posts: 3514
  • Gender: Male
  • surly tapir
Re: newbie question - all these dang taping acronyms?
« Reply #14 on: February 08, 2008, 01:41:28 PM »
kfc

kentucky fried chicken

and there are a bunch of zman inspired notations as well if you are interested in really telling the leechers whats up.

Actually KFC stands for Keep Fucking Cooking.

JAson

+t
open: mbho 603a (ka200n/ka500hn) > SD MP-2 > PCM-M10
stealth: AT853a (o/sc/c/h) > SD MP-2 > ihp120
misc: Earthworks SR77 | Shure VP88

bt & dime

 

RSS | Mobile
Page created in 0.079 seconds with 39 queries.
© 2002-2024 Taperssection.com
Powered by SMF