Taperssection.com

Gear / Technical Help => Remote Power => Topic started by: ttrego2003 on November 07, 2007, 08:33:29 PM

Title: lithium way to power vms5u and ad2k
Post by: ttrego2003 on November 07, 2007, 08:33:29 PM

so is there a way to power a vms5u(5v) and ad2k(12v) with lithiums.  i have 1 dead ec-90 and one that is fine, but brocken charger. need some ideas, because i ran this rig (4022>vms5u>ad2k>co2>jb3) last saturday at panic in charleston,sc and it sounds awesome until batteries died.

todd

Title: Re: lithium way to power vms5u and ad2k
Post by: j5brock on November 07, 2007, 09:15:09 PM

I use the tekkeon 3450 to power my V3.. It can be set to run at 12v and has a second 5v output..with the additional 3450-10.. it would run all day..

Jeff

Title: Re: lithium way to power vms5u and ad2k
Post by: ttrego2003 on November 07, 2007, 09:54:18 PM

is there a 4 pin connection on that battery for ad2k .

Title: Re: lithium way to power vms5u and ad2k
Post by: j5brock on November 08, 2007, 06:28:30 AM

No - you have to hack all your cables.. It uses a 3 lead wire that works as a voltage protector. The black and white are combined as one gives a return signal to the battery that it is connected to a tip. The cable comes with multiple tips kind of like the ratshack build a cable system.. and one of those tips might fit the ad2k.. however, I wanted to use the locking v3 cable - so I hacked the end.

Jeff

Title: Re: lithium way to power vms5u and ad2k
Post by: Jhurlbs81 on November 08, 2007, 03:51:08 PM

<Also wondering about lithium options for the AD2K>

Carry on.

+Ts