Taperssection.com

Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: momule on September 13, 2005, 10:39:02 PM

Title: Toneport UX2
Post by: momule on September 13, 2005, 10:39:02 PM

looks kinda promising.


(http://www.harmony-central.com/Newp/2005/TonePort-UX2-lg.jpg)
 

other full size pic found here
http://www.harmony-central.com/Newp/2005/TonePort-UX2-screen-lg.jpg

Title: Re: Toneport UX2
Post by: noahbickart on September 15, 2005, 01:51:29 AM

+T However, does it Run on DC?

-Noah

Title: Re: Toneport UX2
Post by: johnw on September 15, 2005, 12:01:13 PM

USB powered, software controlled, but it does have a switch for phantom plus gain knobs, so maybe it will work independently of a computer.


2 Mic Inputs with +48v Phantom Power

   2 Guitar/Bass Inputs – use the high gain input for guitars and basses with high level pickup outputs, or the normal input

   Stereo Line Inputs for your line out level gear

   Stereo Digital Output S/PDIF via RCA

   Stereo Line Outputs via balanced 1/4-inch

   Stereo Monitor Input via stereo 1/4-inch jack

   Headphone Output with independent
volume knob

   VU Meters assignable to input, record send, output and monitor levels

   Footswitch Jacks send MIDI commands to recording programs (start/stop, punch in/out, etc.)

   Pro Audio Performance with over 100dB signal-to-noise & dynamic range

   Unique, full tone low latency monitoring regardless of recording software's buffer size

   44.1 & 48KHz, 16 & 24 bit recording

   96KHz mode with built-in sample rate conversion for simultaneous input and output

   USB-powered

   Rock-solid Drivers: ASIO, WDM, Mac OS X

UX2 PREMIUM FEATURES
TonePort™ UX2 has all the features of its little brother UX1, plus a whole lot more!

STEREO MIC IN
The 2 mic ins are perfect for vocals and other mic'd sources, with +48v Phantom Power to drive the finest microphones. Use them for mono or stereo sources, and tone process them together or separately.

DIGITAL OUT
Connect UX2's digital out to your hardware digital recorder for direct digital recording of your premium Line 6 tone, as well as playback from your computer. Provides S/PDIF digital audio at 44.1/48KHz sample rates perfect for CD, DAT and many popular digital recording setups.

EXTRAS
Some are obvious, like the hardware VU meters and footswitch jacks. You'll appreciate others when you need them, like guitar/bass inputs that handle high output instruments, separate volume control for the headphone out, and assignable metering.

http://www.line6.com/toneport/hardware.html

Title: Re: Toneport UX2
Post by: Thom Joad on September 15, 2005, 06:07:02 PM

Love the VU meters!!

Title: Re: Toneport UX2
Post by: momule on September 15, 2005, 06:14:18 PM

Quote from: Thom Joad on September 15, 2005, 06:07:02 PM

Love the VU meters!!

thats what first caught my eye

that and I think it""" may""" function standalone if say Marc or someone was to make a USB power cord for ya.. Or you could use it with a lappy.

seems like a musicians dream..

Title: Re: Toneport UX2
Post by: johnw on September 15, 2005, 06:17:32 PM

How would you set the sample rate and bit depth if it were standalone? I think those settings are software controlled.

Title: Re: Toneport UX2
Post by: momule on September 15, 2005, 06:33:30 PM

yup . good point. +T
I never clamed to be a clever fellow  ;)

I wonder if ya set the "parameters" via Home pc or lappy if it would default back to something else.

Title: Re: Toneport UX2
Post by: johnw on September 15, 2005, 06:55:42 PM

Either way, great option for laptop users. +T backatcha