Topic: Best shockmounts for 460/480's and Shure vert bar

[Nick's Picks]

SSM-5
http://www.nadywireless.com/products/accessories_pgs/accessories_2.html

and that fatty black one for the LSD2.  same construction as the stock nickle one.

[spyder9]

I use these:
http://cgi.ebay.com/SHOCKPROOF-RUBBER-CONDENSER-MICROPHONE-CLIPS_W0QQitemZ7403163363QQcategoryZ29948QQssPageNameZWD1VQQrdZ1QQcmdZViewItem
Dirt cheap and do a great job.  All rubber.

i use these too Dan, i love 'em, and i'm pretty sure the threading is metal

B&H has different sizes to choose from depending on the diameter of your mics:

http://www.bhphotovideo.com/bnh/controller/home?O=productlist&A=details&Q=&sku=298919&is=REG
http://www.bhphotovideo.com/bnh/controller/home?O=productlist&A=details&Q=&sku=298920&is=REG
http://www.bhphotovideo.com/bnh/controller/home?O=productlist&A=details&Q=&sku=298921&is=REG

Yep, exact same ones I have.  Best bang for the buck out there.  Thanks Keith!   

[johnw]

SSM-5
http://www.nadywireless.com/products/accessories_pgs/accessories_2.html

and that fatty black one for the LSD2.  same construction as the stock nickle one.

I got one of these hoping it would work, but the sled is too wide maybe 22+. The 460 body is way loose in it. Maybe the one I got was a fluke though.

[spyder9]

I use these:

http://cgi.ebay.com/SHOCKPROOF-RUBBER-CONDENSER-MICROPHONE-CLIPS_W0QQitemZ7403163363QQcategoryZ29948QQssPageNameZWD1VQQrdZ1QQcmdZViewItem

Has anyone used these with a 390?  The 390's are a few mm's slimmer than the 480's I think.  For the price it would
nice to keep a set of these in the bag.

They have them out there in different sizes.  The smallest is 19mm.  The 20mm fits the 460/480s perfectly.  Nice and snug, but not difficult to pull out. 

[Nick's Picks]

they are a little wide, even for the peluso's.  but a little bit of electrical tape on the mic body and they fit all nice nice