Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: grider on August 14, 2005, 03:29:07 PM
-
bit of a disagreement over in the comments to an etree torrent right now about this issue as it is listed in the lineage for a show; I've never used the AD1000 or looked at it closely, but I used to use a MiniMe, and it was my understanding that the MiniMe was an upgrade from the AD1000 in that it had the added feature (among other features) of a preamp, much as the V3 had done for the V2, and specifically what I am after is whether XLR's can be run directly into the unit as though they would be run into the MiniMe and V3, thanks
-
yes, the AD-1000 does have a pre-amp and can provide phantom power. i have a bunch of tapes that are sourced schoeps > ad-1000. and i'm nearly positive that gordon wilson (aka John Cocktolstoy) used it as a standalone pre/ad with the 480's for a while.
see tha manual here: http://www.taperssection.com/reference/pdf/Manual_ApogeeAD1000.pdf
page 11 specifically states that it will provide phantom power.
-
how about gain controls/trim pots though
-
yep, variable gain.... just like a minime, only it sounds better and no stupid trim pots
the ad500e did not have a preamp but did have variable gain
-
just like a minime, only it sounds better
Agreed.
-
how did I ever not know this information and why did I ever buy a brand new MiniMe, funny shit
-
I too was one of the first on my block to own a minime :P
-
yep, variable gain.... just like a minime, only it sounds better and no stupid trim pots
the ad500e did not have a preamp but did have variable gain
from the manual...
(Note: The LEFT and RIGHT controls can be bypassed and the gain can be routed
to the multi-turn CAL pots if desired. See page 31 for details of this procedure.)
-
yes they are there but you don't have to use them
you ever seen someone using a screwdriver with an ad1k?
-
yes they are there but you don't have to use them
you ever seen someone using a screwdriver with an ad1k?
i am just pointing the function out, i've never seen a person with a screwdriver and an ad1000