Become a Site Supporter and Never see Ads again!

Author Topic: Low End Blowout  (Read 191 times)

Barry M and 1 Guest are viewing this topic.

Offline mterry

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 3069
  • Gender: Male
    • recordings
Low End Blowout
« on: Yesterday at 05:35:10 PM »
One thing I’ve notice since getting back into taping, are bands just throwing some absolute bass bombs. I had this happen to me in 2023 at Goose in Spokane and Phish in Nashville. I was taping FOB both shows, and for the phish show, I wasn’t the only one who suffered from massive distortion. Has this been more of an instance the last few years? Is it the curse
Of running up front? What is everyone doing to mitigate this shit storm of low end distortion that can’t be helped???
"That's deplorable, unfathomable, improbable!"

"Then we played Davidson, and they wore us out. Davidson controlled us - other than Kentucky - as well as any team all year long"
- Bill Self on PTI (2/28/11)

DPA 2012 > Apogee Mini-Me > Tascam DR-100mkIII

Offline grawk

  • Trade Count: (6)
  • Taperssection Member
  • ***
  • Posts: 353
  • Gender: Male
Re: Low End Blowout
« Reply #1 on: Yesterday at 05:48:49 PM »
peak at -18 instead of 0
4015gs/4018vlgs/kk14->mma:a d-vice/sonosax minir82/sonosax sx-m2d2/nagra vi/lectrosonics spdr

Offline nulldogmas

  • Trade Count: (6)
  • Taperssection All-Star
  • ****
  • Posts: 1634
    • How I Escaped My Uncertain Fate
Re: Low End Blowout
« Reply #2 on: Yesterday at 06:05:18 PM »
I've noticed it at a few recent shows, but specifically with the kick drum. In both cases I ended up having to split the recording to stems and then apply an insanely aggressive EQ curve to the percussion stem only.

I can only assume this is venue sound engineers thinking it's their job to make audience members' teeth rattle, but I don't have any further info. (Similarly, I don't know when sound engineers started cranking the Shitty Reverb slider up to 11 on all vocals, but they can stop now, thanks.)

Offline fanofjam

  • Trade Count: (4)
  • Taperssection Member
  • ***
  • Posts: 541
Re: Low End Blowout
« Reply #3 on: Yesterday at 11:13:22 PM »
I'm not sure about it being a trend...but I haven't had any recording issues.  I also ride along at -12db and now that I have a Zoom F3 that I expect to use alot, I expect it to be even less of a possibility since I'll be recording in 32bit float. 
« Last Edit: Yesterday at 11:15:24 PM by fanofjam »

Offline breakonthru

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 164
Re: Low End Blowout
« Reply #4 on: Yesterday at 11:23:24 PM »
peak at -18 instead of 0
this. Sphere went +12dB at points

Offline fanofjam

  • Trade Count: (4)
  • Taperssection Member
  • ***
  • Posts: 541
Re: Low End Blowout
« Reply #5 on: Yesterday at 11:31:55 PM »
peak at -18 instead of 0
this. Sphere went +12dB at points

Did you see the clip going around about Drew Carey's Phish Sphere experience?  Loved it.  :)

Offline opsopcopolis

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 2150
Re: Low End Blowout
« Reply #6 on: Today at 12:45:57 AM »
Goose loves doing that shit. I find it kinda obnoxious. But yeah, no real reason to be peaking at 0, just run lower and you should be safe(er). Can always engage deck limiter right at 0 to save it from actually distorting if you're so inclined

Offline morst

  • I think I found an error on the internet; #UnionStrong
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5974
Re: Low End Blowout
« Reply #7 on: Today at 01:40:08 AM »
When I saw Hamilton in SF (Yes, Lin-Manuel Miranda's musical theatre production) there was one big bass bomb in each of the two acts every night.


Slightly off topic: Great interview with Hamilton touring sound mixer Kevin McCoy by Mythbuster Adam Savage here, but doesn't really mention the bass bombs
https://youtu.be/60OpF3DCVls?si=8CGVDzhBRaPRkmTA
https://toad.social/@morst spoutible.com/morst post.news/@acffhmorst

 

RSS | Mobile
Page created in 0.065 seconds with 37 queries.
© 2002-2024 Taperssection.com
Powered by SMF