Taperssection.com

Gear / Technical Help => Post-Processing, Computer / Streaming / Internet Devices & Related Activity => Topic started by: ts on July 06, 2021, 01:28:39 PM

Title: Cell phone noise removal?
Post by: ts on July 06, 2021, 01:28:39 PM
I’m pretty sure that’s what I got. Some kind of interference. Does Adobe Audition have a tool for this? It’s been awhile since I’ve had to remove any kind noise like this. Thanks.
Title: Re: Cell phone noise removal?
Post by: aaronji on July 06, 2021, 02:09:22 PM
Is it a lot or a little? If only a little, try the spectral editor. It gets tedious if there is a lot to scrub, though. There is also a tool where you can sample the specific sound and remove it throughout, but this isn't as transparent as doing it one at a time (in my opinion).
Title: Re: Cell phone noise removal?
Post by: ts on July 06, 2021, 04:28:26 PM
Is it a lot or a little? If only a little, try the spectral editor. It gets tedious if there is a lot to scrub, though. There is also a tool where you can sample the specific sound and remove it throughout, but this isn't as transparent as doing it one at a time (in my opinion).

It’s throughout and of course more prevalent between tracks and quieter tracks. It’s the “dit dit dit” buzzing sound. I guess I need to sample and remove through out. Thanks.
Title: Re: Cell phone noise removal?
Post by: hoserama on July 07, 2021, 11:32:34 AM
Could try Adobe Audition's sound remover. Sort of a semi-intelligent noise reduction and might be able to handle it on a wider scale, although I bet not to the same level as a close up spectral repair in Izotope RX.
Title: Re: Cell phone noise removal?
Post by: ts on July 09, 2021, 08:16:33 AM
I have Audition 3.0 and I’m having no luck removing this noise. I don’t think 3 has any spectral. I guess Izotope RX is the best way to do it. RX8 is $199.  :facepalm:
Title: Re: Cell phone noise removal?
Post by: Ohm on August 18, 2021, 01:15:28 AM
We like to release a spun wookie into the crowd who mumbles and dances arms flailing until all cell phones have been separated from ignorant and inconsiderate users.

Shielding and starquad mic cables help a lot
Ferrite beads at both mike cable ends can help keep it from acting like an antenna
Keep all contacts clean !  Oxidation on connectors matters as it can cause a "diode" action which can cause RF detection adding to the issue.

Good luck !