Become a Site Supporter and Never see Ads again!

Author Topic: Mono SBD Patch Cables  (Read 2744 times)

0 Members and 1 Guest are viewing this topic.

Offline tgakidis

  • (546)
  • Needs to get out more...
  • *****
  • Posts: 5704
  • Gender: Male
    • My Recordings on the Archive:
Mono SBD Patch Cables
« on: April 22, 2010, 11:20:01 PM »
I just made a few Mono SBD patch cables for the stone church, a local venue here in New Hampshire.  They are real cool about letting us get SBD feeds but the problem is that it's a mone source, which is fine for mixing with audience mics though.  The 3 & 4 Channel cables allow for a bunch of us to get a SBD feed with out any fears of Dead Batteries, Level Adjustments, etc that might occur in a daisy chain of recorders.  The 1/8'" mini gets a mono feed from the board but records to a "stereo" file.

Mono XLR > Stereo 1/8"

3 Channel Mono SBD Patach Cable: Mono XLR > Mono Chopped R\A XLR & Mono Chopped 1/4" & Stereo 1/8"

4 Channel Mono SBD Patch Cable: Mono XLR > 2 Mono XLRs & Mono 1/4" & Mono RCA

GAKables: Custom XLR, Digi & Batt Cables

Mics: Austrian Audio OC818 / Telefunken TF-11 / Telefunken RFT AR-51 / Telefunken ELA M 260 (tk60,tk61,tk62) / Telefunken M60 / AKG c426b / AKG c414 xls / AKG c460b (ck61,ck62,ck63,ck69,a60,ck1,ck22,ck3,ck8,Blue B6) / nBob AKG Actives>PFA/ Naiant AKG Actives>PFA / AT853 w/ 4.7k Mod (Card,Omni,Sub)
Pre-Amps: Sonosax SX-M2 / Lunated V3
Recs: Sound Devices MixPre-10ii, MixPre-10T, MixPre-6ii / Sony PCM-M10 / Roland R-07

My Recordings:


RSS | Mobile
Page created in 0.027 seconds with 24 queries.
© 2002-2021
Powered by SMF