Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: SBM-1 Question  (Read 6347 times)

0 Members and 1 Guest are viewing this topic.

Offline drewcatc

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 11
  • Gender: Male
SBM-1 Question
« on: February 18, 2003, 10:34:52 PM »
I rcently aquried an SBM-1 and have some operating questions.  I run AT933s (sound pros) into the battery boa then an 1/8in mini.  Now my question is can I use the line in option woth the mini or do I have to go into the RCAs on the side of the unit?  Thanks.

Drew
Logged

Offline hippies

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 830
  • Gender: Male
  • "What we all need is a left hand monkey wrench."
Re:SBM-1 Question
« Reply #1 on: February 18, 2003, 11:00:36 PM »
-the 1/8" and 1/4"s are Mic inputs.
-the RCAs are Line imputs.

you'll need an 1/8" mini-> 2xRCA 'Y' cable to make your connection.

peace

~S  
Logged

Offline drewcatc

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 11
  • Gender: Male
Re:SBM-1 Question
« Reply #2 on: February 18, 2003, 11:34:32 PM »
-the 1/8" and 1/4"s are Mic inputs.
-the RCAs are Line imputs.

so what function does the "mic/line in" switch serve?

Drew

Logged

jpschust

  • Guest
  • Trade Count: (0)
Re:SBM-1 Question
« Reply #3 on: February 19, 2003, 12:40:39 AM »
It has to do with the level being fed... Mic level is way lower than line level (I forgget the exact db).  If you are going mics > sbm1 then you are feeding at line level.  Pre > sbm1 then you are at line level.
Logged
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.047 seconds with 29 queries.
© 2002-2024 Taperssection.com
Powered by SMF