Become a Site Supporter and Never see Ads again!

Author Topic: 4 pin mini female XLR to 5 pin mini XLR cables!  (Read 2906 times)

0 Members and 1 Guest are viewing this topic.

Offline nicegrin

  • (5)
  • Taperssection Regular
  • **
  • Posts: 178
4 pin mini female XLR to 5 pin mini XLR cables!
« on: September 22, 2010, 06:33:25 PM »
Hi all!

I´m looking for a set of good quality cables with the following  specifications:

4 pin female mini XLR (*) to 5 pin female mini XLR (**) and about 3-4 feet (90-120 cm) long.
Basically a set of shorter cables that I can run between the Beyerdynamics CK930 caps and the CV 900 bodies instead of the 10 ft standard cables that come with the set.

Could anyone here point me to where I can buy such cables or if they have to be custom made, if so is there any cable wizard here at TS that could make a pair and sell me!  ;D




On mic body:

Pin1 = 0 v.
Pin2 = +48 v.
Pin3 = AF input
Pin 4 = +8.2 v.
Pin 5 = n.c.


On mic capsule:

Pin1= o v.
Pin2= +48v input
Pin3 = NF output 
Pin4 = +8.2 V input
Toy Box:


Omnis:  6xNevaton MCE400s, Countryman b3s (modded), MM HLSOs (4.7K mod), Aevox in ear MK2s, CA-11s
Cards:   Schoeps MK4s with Schoeps CMRS, Milab VM-44 Links, MM HLSC-1s (4.7K mod), ECM-717
Hypers: AKG CK93s (modded), SP CMC-8s (mod), Audix 1280s (Church actives)

INBETWEEN: Naiant Tinybox (CMR mod), Naiant Tinybox (p48 mod), Naiant PFA, CA-9100, CA Ugly, Denecke PS-2 mini, MM-MBM, MM-CBM, SP SPSB-8, custom nuetrik XLR to TRS cables, 5 pin to 5 pin extension cable. 

DECKS: M10, R09-HR , MT2, Sharp MS-H702, MZ-R 70.

Offline Chuck

  • (42)
  • Needs to get out more...
  • *****
  • Posts: 10756
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Reality is merely an illusion, albeit a very persistent one.

Microphones: AKG C 480 B comb-ULS/ CK 61/ CK 63, Sennheiser MKE 2 elements, CAD GXL1200 (cardioid and mod-cardioid capsule & electronics mod), Audix M1290-o, Micro capsule active cables w/ Naiant PFA's, Naiant MSH-1O, Naiant AKG Active cables, Church CA-11 (cardioid), (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlebox, Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Sound Devices MixPre-6, iRiver iHP-120 (Rockboxed & RTC mod)

Recordings on the LMA:
Recording website & blog:

Offline page

  • (25)
  • Needs to get out more...
  • *****
  • Posts: 8388
  • Gender: Male
  • #TeamRetired
Re: 4 pin mini female XLR to 5 pin mini XLR cables!
« Reply #2 on: September 23, 2010, 02:29:36 PM »
Agree. Rob did mine, but Ted's willing as far as I know, just send him the pin out info.

Why beyer did a pin mismatch when its not used is beyond me...
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

Offline JasonSobel

  • (8)
  • Needs to get out more...
  • *****
  • Posts: 3327
  • Gender: Male
    • My show list
Re: 4 pin mini female XLR to 5 pin mini XLR cables!
« Reply #3 on: September 23, 2010, 06:17:22 PM »
I have had two sets of these cables made for my CK930's (in addition to the 10 ft set that comes with them).  Robb made me one set (5ft), and HAVE made the other (20ft).  Both did great work.  The Belden 1804a cable works very well for this.  My 20 ft set (from HAVE) is with the Belden 1804a and it's great.


RSS | Mobile
Page created in 0.035 seconds with 28 queries.
© 2002-2021
Powered by SMF