Become a Site Supporter and Never see Ads again!

Author Topic: Sound Devices MixPre-3 and 6, Part 7  (Read 19840 times)

0 Members and 1 Guest are viewing this topic.

Online morst

  • Trade Unionist
  • (2)
  • Needs to get out more...
  • *****
  • Posts: 4589
Re: Sound Devices MixPre-3 and 6, Part 7
« Reply #180 on: June 25, 2021, 05:31:28 PM »
Have you tested the cable to make sure it is wired correctly?

ugh, yep. the cable is bad. it's essentially a 1/8" stereo TRS to 2 (two) 1/4" stereo TRS (not as described). junk

(edit: setting Channel 3 - usb-1 to phase inverted as a work around)
Well glad you got it figured out, and glad it's not a faulty SD machine!

Offline Gordon

  • (22)
  • Needs to get out more...
  • *****
  • Posts: 11481
  • Gender: Male
    • my list
Re: Sound Devices MixPre-3 and 6, Part 7
« Reply #181 on: June 26, 2021, 10:19:00 PM »
in general how long does it take to write a set or say 2 hour show to usb?

Write speed to my Cruzer Fit was about 3MB/s.
And write speed to a 64MB Samsung Drive Fit MUF-64BB was just above 10MB/s.

I picked up the SanDisk and it is indeed slow.  I didn't do the math but 10.6 gb took about 24 minutes. Going to try the samsung and see how it compares.  The bb are not available but these are....

https://www.amazon.com/dp/B07D7P4SY4/ref=cm_sw_r_cp_api_i_2tM1EbBJHR0GJ?fbclid=IwAR2tS46juga7OGWJEpTMk_G6ComPEy3iNEyhocuH1dk83-w3YywEPl8GWn8&th=1


Got the Samsung in today and just tested with the same 10.6gb files.  Took 15 mins so much faster than the sandisk....
Microtech Gefell M20 or M21 > Nbob actives > Naiant PFA > Sound Devices MixPre-6 II

https://archive.org/details/fav-gordonlw

Offline stancourtney

  • (0)
  • Taperssection Newbie
  • *
  • Posts: 25
Re: Sound Devices MixPre-3 and 6, Part 7
« Reply #182 on: June 30, 2021, 07:01:17 AM »
Does the MixPre-3 have the ability to be used remotely with a timer where I could set the timer to turn on say at 6 pm and turn off at 6 am?

The SD722 has that ability but I am unable to find the topic in the MixPre-3 pdf guides. I would really like to suspend recording 12 hrs of the day.


Offline checht

  • (5)
  • Taperssection Member
  • ***
  • Posts: 413
  • Gender: Male
  • Old and in the Way
Re: Sound Devices MixPre-3 and 6, Part 7
« Reply #183 on: July 13, 2021, 12:15:52 AM »
Does the MixPre-3 have the ability to be used remotely with a timer where I could set the timer to turn on say at 6 pm and turn off at 6 am?

The SD722 has that ability but I am unable to find the topic in the MixPre-3 pdf guides. I would really like to suspend recording 12 hrs of the day.

Not that I know of, sorry.
Schoeps MK41s > nbob KCY >
Naiant PFA 60v > Sound Devices MP-6 II  or  Naiant IPA > Roland R-07
Recordings at LMA: https://archive.org/search.php?query=subject%3A%22Chris+Hecht%22&sort=-date

Offline checht

  • (5)
  • Taperssection Member
  • ***
  • Posts: 413
  • Gender: Male
  • Old and in the Way
Re: Sound Devices MixPre-3 and 6, Part 7
« Reply #184 on: July 13, 2021, 12:23:52 AM »
MP-6 mkII arriving maƱana, to replace mkI running 2.21.08 firmware. (Hey, it's rock solid, and I start recording a half hour before the show so pre-roll not a big deal for me.)

Wondering how y'all run them compared to the I. Levels to 11?

Firmware-wise, seems like only big change is addition of pre-roll. Anything else of note?

TIA
Schoeps MK41s > nbob KCY >
Naiant PFA 60v > Sound Devices MP-6 II  or  Naiant IPA > Roland R-07
Recordings at LMA: https://archive.org/search.php?query=subject%3A%22Chris+Hecht%22&sort=-date

Offline jbell

  • TDS
  • (144)
  • Needs to get out more...
  • *****
  • Posts: 4265
  • Gender: Male
  • Spreadicated
Re: Sound Devices MixPre-3 and 6, Part 7
« Reply #185 on: July 13, 2021, 09:37:33 AM »
You can also lock the controls with newer firmware!  I don't use that feature, but it is nice to have.  File backup to usb drive is also nice.  Don't remember when channel linking came into play, but maybe 2.21 has that feature. 
« Last Edit: July 13, 2021, 10:15:32 AM by jbell »
Microtech Gefell m20's> Nbob KCY> Naiant PFA(60v)> Sound Devices Mixpre-10 II

-22        -12         -6        TDS     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

Offline checht

  • (5)
  • Taperssection Member
  • ***
  • Posts: 413
  • Gender: Male
  • Old and in the Way
Re: Sound Devices MixPre-3 and 6, Part 7
« Reply #186 on: July 14, 2021, 09:59:00 AM »
You can also lock the controls with newer firmware!  I don't use that feature, but it is nice to have.  File backup to usb drive is also nice.  Don't remember when channel linking came into play, but maybe 2.21 has that feature.

Thanks for the info.
Locking controls will be great. Does Wingan still change things when the unit is locked?
USB stick work as a drive in this scenario?
Schoeps MK41s > nbob KCY >
Naiant PFA 60v > Sound Devices MP-6 II  or  Naiant IPA > Roland R-07
Recordings at LMA: https://archive.org/search.php?query=subject%3A%22Chris+Hecht%22&sort=-date

Offline jbell

  • TDS
  • (144)
  • Needs to get out more...
  • *****
  • Posts: 4265
  • Gender: Male
  • Spreadicated
Re: Sound Devices MixPre-3 and 6, Part 7
« Reply #187 on: July 14, 2021, 10:22:09 AM »
Wingman only stops and starts recording!  I'm not sure if the controls are locked if that also locks the Wingman app.  My hunch is no.  The USB backs up the recording after a show is finished.  Next time you turn on the recorder if you have a drive in the USB it will start to transfer it to the drive.

You can also lock the controls with newer firmware!  I don't use that feature, but it is nice to have.  File backup to usb drive is also nice.  Don't remember when channel linking came into play, but maybe 2.21 has that feature.

Thanks for the info.
Locking controls will be great. Does Wingan still change things when the unit is locked?
USB stick work as a drive in this scenario?
Microtech Gefell m20's> Nbob KCY> Naiant PFA(60v)> Sound Devices Mixpre-10 II

-22        -12         -6        TDS     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

Offline Gordon

  • (22)
  • Needs to get out more...
  • *****
  • Posts: 11481
  • Gender: Male
    • my list
Re: Sound Devices MixPre-3 and 6, Part 7
« Reply #188 on: July 14, 2021, 10:56:45 AM »
The USB backs up the recording after a show is finished.  Next time you turn on the recorder if you have a drive in the USB it will start to transfer it to the drive.

If you already have the usb in it will start when you stop the recording.
Microtech Gefell M20 or M21 > Nbob actives > Naiant PFA > Sound Devices MixPre-6 II

https://archive.org/details/fav-gordonlw

Offline emery

  • (0)
  • Taperssection Newbie
  • *
  • Posts: 46
Re: Sound Devices MixPre-3 and 6, Part 7
« Reply #189 on: July 15, 2021, 09:00:02 AM »
You can also lock the controls with newer firmware!

MixPre v1 now have this in firmware (7.10) as well.

v7.10 Support for front panel lock

Page 22 - Press channel knobs 1, 2 and 3 simultaneously to enter the Front Panel Menu.
ps - oh and by the way, I only have 1 ticket and like 5 posts b/c this is a new screen name. My old one was "eclark" but I had someone that was taking tickets from me like everyday and I didn't want to deal with it so I just signed up for a new name.

Online morst

  • Trade Unionist
  • (2)
  • Needs to get out more...
  • *****
  • Posts: 4589
Re: Sound Devices MixPre-3 and 6, Part 7
« Reply #190 on: July 15, 2021, 01:29:44 PM »
You can also lock the controls with newer firmware!

MixPre v1 now have this in firmware (7.10) as well.

v7.10 Support for front panel lock

Page 22 - Press channel knobs 1, 2 and 3 simultaneously to enter the Front Panel Menu.


IT'S NEVER DONE THAT BEFORE!
https://youtu.be/4Cfumd0JPBw
(time bandits clip)

Offline checht

  • (5)
  • Taperssection Member
  • ***
  • Posts: 413
  • Gender: Male
  • Old and in the Way
Re: Sound Devices MixPre-3 and 6, Part 7
« Reply #191 on: July 22, 2021, 07:59:27 PM »
Gain question related to Mk II functionality.

1. Over recording isn't an issue, so no need for fast/easy gain reduction.
2. Why not set input gain with wanted boost, rather than using knob to add post-fade gain?
3. Doesn't input gain add less noise?

I use custom setup, with gain set to basic, maybe I can't access this control setup?

TIA
Schoeps MK41s > nbob KCY >
Naiant PFA 60v > Sound Devices MP-6 II  or  Naiant IPA > Roland R-07
Recordings at LMA: https://archive.org/search.php?query=subject%3A%22Chris+Hecht%22&sort=-date

 

RSS | Mobile
Page created in 0.058 seconds with 35 queries.
© 2002-2021 Taperssection.com
Powered by SMF